Job posting reference 00152
Region Qatar
Location Doha
Contract type Permanent
Start date 01/03/11
Job description
Must have a minimum of 10 years in Project Management. B.Sc. (Engineering) qualification or equivalent. Coordinate multi-discipline project design packages, effectively control project costs, project schedules and resolve quality constraints as dictated by project client is essential. Experience in Oil and Gas projects and in an EPIC fast-track environment would be an advantage. Shall be a strong team player with good communication and interpersonal skills. Must possess a Bachelor's Degree in Engineering or its equivalent. Masteral studies or other related graduate courses is an added advantage.
APPLY
Thursday, June 23, 2011
SENIOR STRUCTURAL ENGINEER (ONSHORE)
Job posting reference 00252
Region Qatar
Location Doha
Contract type Permanent
Start date 31/10/10
Job description
Must have 10-15 years work experience in conducting structural engineering analysis and design work for all types of offshore structures including fixed and floating.
Knowledge in different types of offshore analysis such as Pre-Service (i.e Lift Analysis, Load-Out analysis, Transportation analysis, launch and unpending analysis, On-bottom stability analysis) and In-service (i.e. In-place analysis with PSI, Fatigue analysis, Seismic analysis and vibration analysis). Perform miscellaneous offshore design calculations such as pipe support, equipment support, riser and conductor clamp support, pad-eye, dropped object and detailed connections, etc.
Perform preparation of calculation report. Conversant with handling software like SACS, GRLWEAP, STAAD offshore and SESAM. Good knowledge of international standard realated to offshore design such as API RP 2A, DNV, American, British, etc.
Perform offshore survey and prepare site survey report. Good presentation skills and the ability to interface with clients.
Execute structural discipline engineering activities within budget and schedule, while maintaining technical integrity.
Able to work independently and has the ability to lead a team of engineers and designers.
Must be a graduate of Civil Engineering, Masteral studies in Structural, Ocean Engineering or Offshore Structures or equivalent.
APPLY
Region Qatar
Location Doha
Contract type Permanent
Start date 31/10/10
Job description
Must have 10-15 years work experience in conducting structural engineering analysis and design work for all types of offshore structures including fixed and floating.
Knowledge in different types of offshore analysis such as Pre-Service (i.e Lift Analysis, Load-Out analysis, Transportation analysis, launch and unpending analysis, On-bottom stability analysis) and In-service (i.e. In-place analysis with PSI, Fatigue analysis, Seismic analysis and vibration analysis). Perform miscellaneous offshore design calculations such as pipe support, equipment support, riser and conductor clamp support, pad-eye, dropped object and detailed connections, etc.
Perform preparation of calculation report. Conversant with handling software like SACS, GRLWEAP, STAAD offshore and SESAM. Good knowledge of international standard realated to offshore design such as API RP 2A, DNV, American, British, etc.
Perform offshore survey and prepare site survey report. Good presentation skills and the ability to interface with clients.
Execute structural discipline engineering activities within budget and schedule, while maintaining technical integrity.
Able to work independently and has the ability to lead a team of engineers and designers.
Must be a graduate of Civil Engineering, Masteral studies in Structural, Ocean Engineering or Offshore Structures or equivalent.
APPLY
SENIOR ELECTRICAL ENGINEER
Job posting reference 00822
Region Qatar
Location Doha
Contract type Permanent
Start date Immediate
Job description
Must have 12-15 years work experience in preparation of electrical design basis which includes scope of work as per standards/regulations such as IEEE, BS and IEC-Total and emergency power requirement, sizing calculations for electrical items, preparation of single line diagram, electric layout. Preparation of technical specification/data sheets. Preparation of technical bid evaluation and recommendation. Approval and review of vendor drawings.
APPLY
Region Qatar
Location Doha
Contract type Permanent
Start date Immediate
Job description
Must have 12-15 years work experience in preparation of electrical design basis which includes scope of work as per standards/regulations such as IEEE, BS and IEC-Total and emergency power requirement, sizing calculations for electrical items, preparation of single line diagram, electric layout. Preparation of technical specification/data sheets. Preparation of technical bid evaluation and recommendation. Approval and review of vendor drawings.
APPLY
ELECTRICAL POWER SYSTEMS ENGINEER
Job posting reference 00824
Region Qatar
Location Doha
Contract type Permanent
Start date 01/03/11
Job description
Must have 12-15 years work experience in the field of Electric Power System design/study/analysis of infrastructure and industrial power system involving switchyards and substation up to 132kV level. Must be able to carry out following studies: Load flow studies, fault level/short circuit studies. Relay setting and protection coordination calculations, transient stability, harmonic analysis, arc flash conversant with the use of the following electrical engineering softwares CYME/ETAP/EDA/SKM. Must possess a Bachelor's Degree in Engineering and other related post-graduate courses will be an added advantage.
APPLY
Region Qatar
Location Doha
Contract type Permanent
Start date 01/03/11
Job description
Must have 12-15 years work experience in the field of Electric Power System design/study/analysis of infrastructure and industrial power system involving switchyards and substation up to 132kV level. Must be able to carry out following studies: Load flow studies, fault level/short circuit studies. Relay setting and protection coordination calculations, transient stability, harmonic analysis, arc flash conversant with the use of the following electrical engineering softwares CYME/ETAP/EDA/SKM. Must possess a Bachelor's Degree in Engineering and other related post-graduate courses will be an added advantage.
APPLY
SENIOR PROCESS ENGINEER
Job posting reference 01090
Region Qatar
Location Doha
Contract type Permanent
Start date Immediate
Job description
MAIN RESPONSIBILITIES
To oversee the design, modelling, execution and analysis of Process engineering requirements on a project, proposal or tender as per client instructions, in a timely, technically and economically optimum manner to meet the overall Project / proposal objectives
QUALIFICATIONS / EXPERIENCE
Must have 15 years work experience
Proficient in preparation of PFD’s and P&ID’s for process facilities (Oil and Gas/ Offshore / Petrochemical) and utilities, Heat and Mass balance, Cause & Effect charts design of equipment and instrument
preparation of process equipment and instrument data sheets
Hands-on experience in process simulation softwares such as HYSIS, PIPESIM, FLARENET
Experience in HAZOP and SIL review
Must have experience in preparation of process documents (process description, operating control philosophy, instrument philosophy, operating manuals).
Proficiency with other process softwares like FLARESIM, PIPENET and HTRI would be an added advantage.
REPORTING:
Reports functionally to the Head of Discipline and operationally to one or more Project Managers or Engineers
EDUCATION LEVEL:
Diploma / Bachelors Degree in Chemical Engineering
Masteral Studies will be an addedd advantage
JOB TYPE: Long Term
APPLY
Region Qatar
Location Doha
Contract type Permanent
Start date Immediate
Job description
MAIN RESPONSIBILITIES
To oversee the design, modelling, execution and analysis of Process engineering requirements on a project, proposal or tender as per client instructions, in a timely, technically and economically optimum manner to meet the overall Project / proposal objectives
QUALIFICATIONS / EXPERIENCE
Must have 15 years work experience
Proficient in preparation of PFD’s and P&ID’s for process facilities (Oil and Gas/ Offshore / Petrochemical) and utilities, Heat and Mass balance, Cause & Effect charts design of equipment and instrument
preparation of process equipment and instrument data sheets
Hands-on experience in process simulation softwares such as HYSIS, PIPESIM, FLARENET
Experience in HAZOP and SIL review
Must have experience in preparation of process documents (process description, operating control philosophy, instrument philosophy, operating manuals).
Proficiency with other process softwares like FLARESIM, PIPENET and HTRI would be an added advantage.
REPORTING:
Reports functionally to the Head of Discipline and operationally to one or more Project Managers or Engineers
EDUCATION LEVEL:
Diploma / Bachelors Degree in Chemical Engineering
Masteral Studies will be an addedd advantage
JOB TYPE: Long Term
APPLY
SENIOR OFFSHORE STRUCTURAL DESIGNER
Job posting reference 02929
Region Qatar
Location Doha
Contract type Permanent
Start date Immediate
Job description
Must have at least 10-15 years of design drafting experience related to offshore structures such as deck, jackets and other offshore structures.
Has the ability to lead a small team of designers and draftsmen.
Organization and coordination of design and drafting issue related to offshore deck, jackets and other offshore structures.
Perform offshore survey and prepare site survey report.
Able to work independently and has the ability to check drawings to maintain and achieve quality packages.
Proficient in AUTOCAD and MICROSTATION drafting software.
Familiar with 3D modeling software like PDS, PDMS and good knowledge in fabrication, detailing is preferable.
Familiarity with international codes such as British, American, API, etc. Must be a graduate of Civil Engineering, Drafting Technology, Diploma in Civil Engineering or equivalent.
APPLY
Region Qatar
Location Doha
Contract type Permanent
Start date Immediate
Job description
Must have at least 10-15 years of design drafting experience related to offshore structures such as deck, jackets and other offshore structures.
Has the ability to lead a small team of designers and draftsmen.
Organization and coordination of design and drafting issue related to offshore deck, jackets and other offshore structures.
Perform offshore survey and prepare site survey report.
Able to work independently and has the ability to check drawings to maintain and achieve quality packages.
Proficient in AUTOCAD and MICROSTATION drafting software.
Familiar with 3D modeling software like PDS, PDMS and good knowledge in fabrication, detailing is preferable.
Familiarity with international codes such as British, American, API, etc. Must be a graduate of Civil Engineering, Drafting Technology, Diploma in Civil Engineering or equivalent.
APPLY
SENIOR OFFSHORE STRUCTURAL ENGINEER
Job posting reference 02123
Region Qatar
Location Doha
Contract type Contract
Start date Immediate
Job description
Pivotal Job title: Senior Offshore Structural Engineer
Job purpose: He will be responsible to ensure the smooth functioning of OFFSHORE STRUCTURAL FRONT END ENGINEERING AND DESIGN engineering works for internal and external projects. (greenfield and brownfield).
Reporting lines and interactions:
Functionally reports to: Project Manager
Operationally reports to: Chief Operating Officer
Directly supervises: Lead and Senior Civil and Structural Team
Key interactions (internally, externally): Client Project Managers and Senior Staff Engineers in various disciplines (EXTERNALLY)
Various Discipline Heads and senior engineers of INTERNALLY (TPME Team).
Main accountabilities:
a) General for both Civil and Structural team
1) Acts as the contact of the Project team for all matters in connection with Offshore Structural Engineering for a client.
2) Regularly informs the Project Management Team including Engineering Manager and Chief Operating Officer of majors events affecting the contract's progress whether positively or negatively.
4) Participates in the update and development of Departmental know-how and methodologies through developing and reviewing all Offshore Structural Design and Project Execution Procedures and Documentations.
5) Contributing towards, maintaining and implementing both company and client HSE Management System objectives and procedures
6. Act as member of the project team, giving assistance to the Project Manager, Chief Operating Officer and Proposals Manager.
Additional information:
Educational Degrees and Certifications
University or Higher Education: Any 5 year degree (BSc in Civil /or Structural engineering
is preferable)
Masteral studies in Structural, Ocean Engineering
Offshore Structures or equivalent.
Computer Skills: Basic knowledge of MS Office (Excel and Word)
Language Skills: English -Written, Spoken - Fluent
Arabic -Written, Spoken - good working knowledge
is an advantage
French - Written, Spoken - working knowledge is an
advantage
Experience: - Must have 10-15 years work experience in conducting structural engineering analysis and design work for all types of offshore structures including fixed and floating. Knowledge in difference types of offshore analysis such as Pre-Service (i.e. Lift Analysis, Load-Out analysis, Transportation analysis, launch and upending analysis, On-bottom stability analysis) and In-service (i.e. In-place analysis with PSI, Fatigue analysis, Seismic analysis and vibration analysis. Perform miscellaneous offshore design calculations such as pipe support, equipment support, riser and conductor clamp support, pad-eye, dropped object and detailed connections, etc. Perform preparation of calculation report. Conversant with handling software like SACS, GRLWEAP, STAAD offshore and SESAM. Good knowledge of international standard related to offshore design such as API RP 2A, DNV, American, British, etc. Perform offshore survey and prepare site survey report. Good presentation skills and the ability to interface with clients. Execute structural discipline engineering activities within budget and schedule, while maintaining technical integrity. Able to work independently and has the ability to lead a team of engineers and designers.
Key Personal Qualities: - good levels of creativity and initiative - very good with
communication skills and very good analytical skills
Key Competencies - Technical / Professional Knowledge
- Time management
- Quality Orientation
- Planning and Organization
APPLY
Region Qatar
Location Doha
Contract type Contract
Start date Immediate
Job description
Pivotal Job title: Senior Offshore Structural Engineer
Job purpose: He will be responsible to ensure the smooth functioning of OFFSHORE STRUCTURAL FRONT END ENGINEERING AND DESIGN engineering works for internal and external projects. (greenfield and brownfield).
Reporting lines and interactions:
Functionally reports to: Project Manager
Operationally reports to: Chief Operating Officer
Directly supervises: Lead and Senior Civil and Structural Team
Key interactions (internally, externally): Client Project Managers and Senior Staff Engineers in various disciplines (EXTERNALLY)
Various Discipline Heads and senior engineers of INTERNALLY (TPME Team).
Main accountabilities:
a) General for both Civil and Structural team
1) Acts as the contact of the Project team for all matters in connection with Offshore Structural Engineering for a client.
2) Regularly informs the Project Management Team including Engineering Manager and Chief Operating Officer of majors events affecting the contract's progress whether positively or negatively.
4) Participates in the update and development of Departmental know-how and methodologies through developing and reviewing all Offshore Structural Design and Project Execution Procedures and Documentations.
5) Contributing towards, maintaining and implementing both company and client HSE Management System objectives and procedures
6. Act as member of the project team, giving assistance to the Project Manager, Chief Operating Officer and Proposals Manager.
Additional information:
Educational Degrees and Certifications
University or Higher Education: Any 5 year degree (BSc in Civil /or Structural engineering
is preferable)
Masteral studies in Structural, Ocean Engineering
Offshore Structures or equivalent.
Computer Skills: Basic knowledge of MS Office (Excel and Word)
Language Skills: English -Written, Spoken - Fluent
Arabic -Written, Spoken - good working knowledge
is an advantage
French - Written, Spoken - working knowledge is an
advantage
Experience: - Must have 10-15 years work experience in conducting structural engineering analysis and design work for all types of offshore structures including fixed and floating. Knowledge in difference types of offshore analysis such as Pre-Service (i.e. Lift Analysis, Load-Out analysis, Transportation analysis, launch and upending analysis, On-bottom stability analysis) and In-service (i.e. In-place analysis with PSI, Fatigue analysis, Seismic analysis and vibration analysis. Perform miscellaneous offshore design calculations such as pipe support, equipment support, riser and conductor clamp support, pad-eye, dropped object and detailed connections, etc. Perform preparation of calculation report. Conversant with handling software like SACS, GRLWEAP, STAAD offshore and SESAM. Good knowledge of international standard related to offshore design such as API RP 2A, DNV, American, British, etc. Perform offshore survey and prepare site survey report. Good presentation skills and the ability to interface with clients. Execute structural discipline engineering activities within budget and schedule, while maintaining technical integrity. Able to work independently and has the ability to lead a team of engineers and designers.
Key Personal Qualities: - good levels of creativity and initiative - very good with
communication skills and very good analytical skills
Key Competencies - Technical / Professional Knowledge
- Time management
- Quality Orientation
- Planning and Organization
APPLY
INSTRUMENTATION SYSTEM LEADER
Job posting reference 03001
Region Qatar
Location Doha
Contract type Contract
Start date 01/05/11
Job description
POSITION : SYSTEM LEADER (INSTRUMENTATION)
Job Description
Have basic FEED and Detailed Design Architecture Diagrams on revamping projects in an Oil and Gas Project
Function as Project Leader when assigned in projects, responsible for managing a team of 2 engineers and 2 designers and draftsmen and delivering the engineering requirements of the project.
Able to understand Client engineering needs such as constructability and installation scenario options
Able to perform site visits to identify real needs from Operations and translate them into practical activity for TPME
Follow constructions and commissioning activities performed by the CLient to anticipate any trouble during project implementations
To be able to review Client proposals, manage tight schedules and approve the discipline documents
Be able to prepare Close Out reports
Can handle liaising with all project proponents such as Project Managers, Discipline Heads, Client Engineers, Subcontractors and Vendors and Suppliers, HSE Unit Heads involved in the project
SPECIFIC PROJECT SCOPE (Revamping activities of an existing project facility)
Compressor unit monitoring system replacement
Vibration Monitoring system replacement
RGT generators control panels (8) replacements
Modifications of control and safety logics equipment
Installation of associate work
Riser Valves, ESDV modifications
Job Requirements
Degree in Instrumentation Engineering and or Electrical Engineering from a recorgnized University
Master's Degree is an advantage but not required
Expert knowledge in applicable theories, practices and accepted procedures
Shall have at least 10-15 years as an Instrumentation Control Engineer in Oil and Gas Project or related Industry
Job Function: Bachelor's Degree
Job Location : Doha, Qatar
Job Type : Contractual (2 years)
APPLY
Region Qatar
Location Doha
Contract type Contract
Start date 01/05/11
Job description
POSITION : SYSTEM LEADER (INSTRUMENTATION)
Job Description
Have basic FEED and Detailed Design Architecture Diagrams on revamping projects in an Oil and Gas Project
Function as Project Leader when assigned in projects, responsible for managing a team of 2 engineers and 2 designers and draftsmen and delivering the engineering requirements of the project.
Able to understand Client engineering needs such as constructability and installation scenario options
Able to perform site visits to identify real needs from Operations and translate them into practical activity for TPME
Follow constructions and commissioning activities performed by the CLient to anticipate any trouble during project implementations
To be able to review Client proposals, manage tight schedules and approve the discipline documents
Be able to prepare Close Out reports
Can handle liaising with all project proponents such as Project Managers, Discipline Heads, Client Engineers, Subcontractors and Vendors and Suppliers, HSE Unit Heads involved in the project
SPECIFIC PROJECT SCOPE (Revamping activities of an existing project facility)
Compressor unit monitoring system replacement
Vibration Monitoring system replacement
RGT generators control panels (8) replacements
Modifications of control and safety logics equipment
Installation of associate work
Riser Valves, ESDV modifications
Job Requirements
Degree in Instrumentation Engineering and or Electrical Engineering from a recorgnized University
Master's Degree is an advantage but not required
Expert knowledge in applicable theories, practices and accepted procedures
Shall have at least 10-15 years as an Instrumentation Control Engineer in Oil and Gas Project or related Industry
Job Function: Bachelor's Degree
Job Location : Doha, Qatar
Job Type : Contractual (2 years)
APPLY
PDS ADMINISTRATOR
Job posting reference 03084
Region Qatar
Location Doha
Contract type Temporary
Start date Immediate
Job description
PDS Administrator
Reporting lines and interactions:
Functionally reports to:Head of Piping Department
Directly supervises (operationally): none
Key interactions (internally, externally): All engineering discipline engineers and designers
Job scope (budget, management, specific criteria): dimensions of the job
very proficient in Inrgraph PDS System and set-up
PDS Administration and Support Activities
Reference Data Base Creation
Imparting Training to Designers
Knowledgeable in Pelican Forge Setup and Support
SMARTPLANT Review support and Set-up
Profile:
BE / B Tech and or BS Mechanical Engineering Graduates
Experience information:
at least 5 to 10 years experience in Oil and Gas Onshore/Offshore installations
preferably experience in both Greenfield and Brownfield oil and gas projects
Capable of doing PDS Administration function independently
APPLY
Region Qatar
Location Doha
Contract type Temporary
Start date Immediate
Job description
PDS Administrator
Reporting lines and interactions:
Functionally reports to:Head of Piping Department
Directly supervises (operationally): none
Key interactions (internally, externally): All engineering discipline engineers and designers
Job scope (budget, management, specific criteria): dimensions of the job
very proficient in Inrgraph PDS System and set-up
PDS Administration and Support Activities
Reference Data Base Creation
Imparting Training to Designers
Knowledgeable in Pelican Forge Setup and Support
SMARTPLANT Review support and Set-up
Profile:
BE / B Tech and or BS Mechanical Engineering Graduates
Experience information:
at least 5 to 10 years experience in Oil and Gas Onshore/Offshore installations
preferably experience in both Greenfield and Brownfield oil and gas projects
Capable of doing PDS Administration function independently
APPLY
INSTRUMENTATION DESIGNER
Job posting reference 03339
Region Qatar
Location Doha
Contract type Temporary
Start date 19/05/11
Job description
Instrumentation Designer
Purpose and Scope
The Instrumentation Designer is mainly concerned with the preparation of design deliverables tor projects, tenders or proposals based on Engineers' plans and according to qualify standards and client requirements.
Key Responsibilities:
1. Organization and co-ordination of design or drafting duties. Output includes:
- Input / Output list
- Equipment list Layout
- Control Room Arrangement
- Field Instrumentation Layouts
- Preliminary Cable Routing
- Typical Installation Details
- Material Take-Off
- Loop Diagrams
- Permutation Diagrams
- Detailed Cable / Tray Routing
- Cable Schedules
- Installation Details
- As-Built Documentation
2. Development of drawings, models and documents listed above using CAD systems, as required for the Project or Proposal
3. Revision of other discipline drawings/documents for IDC when required and as per Protocol General Section 1.3 and in GWP A 151-10.; Checking back-drafted drawings for compliance with QA standards and procedures when required; ; Checking back-drafted drawings for compliance with QA standards and procedures when required;
4. Completion of deliverables on schedule and within the hours allocated.
5. Providing feedback to Lead Engineers on client/site/vendor queries
6. Planning drawing deliverables in line with schedule requirements; Assigning and supervising tasks to Draftsmen to meet project schedule.
7. Providing technical support to draftsmen.
8. Review of vendor drawings as needed
9. Providing input for proposal preparation purposes. Deliverables include; Preliminary Input / Output lists, drawings man-hour estimation and Preliminary Equipment list Layout.
10. Contributing towards, maintaining and implementing both company and client HSE Management
System objectives and procedures, as specified in GWP A 302 -16 2 and the HSE Manual 1357 A HSEM – 2
11. Complying with the applicable company procedures for the Engineering Department and the Instrumentation and Control Discipline as they are documented in DWP A 302 – 02, and DWP A 392-01 respectively, as well as those procedures in the references listed therein.
Educational Requirements:
Technical Certification
Experience Requirement:
Total of 8 years experience
Specific Experience Areas Good knowledge of Instrumentation theory, Oil & Gas/Refinery/Petrochemical Industry, Fundamental Knowledge of Design Practices, Computer literate including AutoCAD, Field Construction/Supervision Experience, Telecommunication
Proven Experience in:
Intergraph
Intools
MS Word
Candidate should have advanced skills in
AutoCAD
MS Excel
MS Access
Languages:
English
APPLY
Region Qatar
Location Doha
Contract type Temporary
Start date 19/05/11
Job description
Instrumentation Designer
Purpose and Scope
The Instrumentation Designer is mainly concerned with the preparation of design deliverables tor projects, tenders or proposals based on Engineers' plans and according to qualify standards and client requirements.
Key Responsibilities:
1. Organization and co-ordination of design or drafting duties. Output includes:
- Input / Output list
- Equipment list Layout
- Control Room Arrangement
- Field Instrumentation Layouts
- Preliminary Cable Routing
- Typical Installation Details
- Material Take-Off
- Loop Diagrams
- Permutation Diagrams
- Detailed Cable / Tray Routing
- Cable Schedules
- Installation Details
- As-Built Documentation
2. Development of drawings, models and documents listed above using CAD systems, as required for the Project or Proposal
3. Revision of other discipline drawings/documents for IDC when required and as per Protocol General Section 1.3 and in GWP A 151-10.; Checking back-drafted drawings for compliance with QA standards and procedures when required; ; Checking back-drafted drawings for compliance with QA standards and procedures when required;
4. Completion of deliverables on schedule and within the hours allocated.
5. Providing feedback to Lead Engineers on client/site/vendor queries
6. Planning drawing deliverables in line with schedule requirements; Assigning and supervising tasks to Draftsmen to meet project schedule.
7. Providing technical support to draftsmen.
8. Review of vendor drawings as needed
9. Providing input for proposal preparation purposes. Deliverables include; Preliminary Input / Output lists, drawings man-hour estimation and Preliminary Equipment list Layout.
10. Contributing towards, maintaining and implementing both company and client HSE Management
System objectives and procedures, as specified in GWP A 302 -16 2 and the HSE Manual 1357 A HSEM – 2
11. Complying with the applicable company procedures for the Engineering Department and the Instrumentation and Control Discipline as they are documented in DWP A 302 – 02, and DWP A 392-01 respectively, as well as those procedures in the references listed therein.
Educational Requirements:
Technical Certification
Experience Requirement:
Total of 8 years experience
Specific Experience Areas Good knowledge of Instrumentation theory, Oil & Gas/Refinery/Petrochemical Industry, Fundamental Knowledge of Design Practices, Computer literate including AutoCAD, Field Construction/Supervision Experience, Telecommunication
Proven Experience in:
Intergraph
Intools
MS Word
Candidate should have advanced skills in
AutoCAD
MS Excel
MS Access
Languages:
English
APPLY
PROPOSAL ENGINEER (TENDERING)
Job posting reference 03090
Region Qatar
Location Doha
Contract type Permanent
Start date 01/05/11
Job description
PROPOSALS ENGINEER
Reporting lines and interactions:
Functionally reports to: Proposal Manager
Directly supervises (operationally): Proposal assistants and secretary
Liaising with Business Devt. Manager, Discipline Engineers, Heads of Disciplines, Estimation Division, Cost Control Division
Profile:
Graduate of any Engineering Course preferably with Masteral studies is an added advantage
At least 5 years solid experience in Commercial aspects of the projects in Oil and Gas Industry and related work environment
At least 2 years in Proposals Department, Contracts, Planning and Scheduling and Estimation
proven experience in engineering projects (oil and gas) of multi-disciplinary nature
Main accountabilities:
He shall be responsible for ensuring that Technical Proposals are prepared as per client requirements and such preparation takes place with the involvement of all necessary participants in the project.
He/she functions under the the leadership and supervision of the Proposal Manager
Review and evaluate the extent of work and list the company dpeartments that are to be involved with the Tender Praparation
Prepare write up and content of the un-priced Technical Proposal including the technical clarifications / qualifications on the basis of client
Prepare list of proposed key personnel for the project in coordination with the Heads of participating disciplines
Compile all estimated manhours and discuss them with the relevant disciplines and submit the same to Cost / Estimation for pricing
Ensure that priced proposals as per client requirements are complete
To participate when required in Cost Meetings attended by the Commercial and Cost Control departments
To initiate Bid Bond requests, parent company quarantees, powers of attorney and similar requests when required
Prepare Proposal Preparation Check List for Large Projects
Comply with Quality Management System of Technip Group
Additional information:
Acts as Deputy Officer for Proposal Division Manager
APPLY
Region Qatar
Location Doha
Contract type Permanent
Start date 01/05/11
Job description
PROPOSALS ENGINEER
Reporting lines and interactions:
Functionally reports to: Proposal Manager
Directly supervises (operationally): Proposal assistants and secretary
Liaising with Business Devt. Manager, Discipline Engineers, Heads of Disciplines, Estimation Division, Cost Control Division
Profile:
Graduate of any Engineering Course preferably with Masteral studies is an added advantage
At least 5 years solid experience in Commercial aspects of the projects in Oil and Gas Industry and related work environment
At least 2 years in Proposals Department, Contracts, Planning and Scheduling and Estimation
proven experience in engineering projects (oil and gas) of multi-disciplinary nature
Main accountabilities:
He shall be responsible for ensuring that Technical Proposals are prepared as per client requirements and such preparation takes place with the involvement of all necessary participants in the project.
He/she functions under the the leadership and supervision of the Proposal Manager
Review and evaluate the extent of work and list the company dpeartments that are to be involved with the Tender Praparation
Prepare write up and content of the un-priced Technical Proposal including the technical clarifications / qualifications on the basis of client
Prepare list of proposed key personnel for the project in coordination with the Heads of participating disciplines
Compile all estimated manhours and discuss them with the relevant disciplines and submit the same to Cost / Estimation for pricing
Ensure that priced proposals as per client requirements are complete
To participate when required in Cost Meetings attended by the Commercial and Cost Control departments
To initiate Bid Bond requests, parent company quarantees, powers of attorney and similar requests when required
Prepare Proposal Preparation Check List for Large Projects
Comply with Quality Management System of Technip Group
Additional information:
Acts as Deputy Officer for Proposal Division Manager
APPLY
CIVIL/ STRUCTURAL DESIGNER
Job posting reference 03352
Region Qatar
Location Doha
Contract type Temporary
Start date 23/05/11
Job description
Description of main tasks to be accomplished:
Generation of general arrangement and detailed drawings for offshore structures, both Topsides and Jackets.
Development of drawings using AUTOCAD for various components of Jackets and Topsides,connection details, MTO Preparation, interaction with engineers etc.
Nature of experience requirement:
Minimum 6 years of overall experience out of which at least 3 years in drafting of offshore structures. Should have adequate knowledge of various components of jackets and topsides and their usage.Proficiency in AUTOCAD is a must. Knowledge and experience in PDS and/or PDMS will be given preference.
Educational Degrees and Certifications
Minimum Diploma in Civil Engineering
Special Requirements:
Adequate communicatuin knowledge in English for interactionwih others in the office.
APPLY
Region Qatar
Location Doha
Contract type Temporary
Start date 23/05/11
Job description
Description of main tasks to be accomplished:
Generation of general arrangement and detailed drawings for offshore structures, both Topsides and Jackets.
Development of drawings using AUTOCAD for various components of Jackets and Topsides,connection details, MTO Preparation, interaction with engineers etc.
Nature of experience requirement:
Minimum 6 years of overall experience out of which at least 3 years in drafting of offshore structures. Should have adequate knowledge of various components of jackets and topsides and their usage.Proficiency in AUTOCAD is a must. Knowledge and experience in PDS and/or PDMS will be given preference.
Educational Degrees and Certifications
Minimum Diploma in Civil Engineering
Special Requirements:
Adequate communicatuin knowledge in English for interactionwih others in the office.
APPLY
PIPING DESIGNER
Job posting reference 03366
Region Qatar
Location Doha
Contract type Temporary
Start date 23/05/11
Job description
Piping Designer
Purpose and Scope
The Piping Designer is mainly concerned with the preparation of design deliverables for projects and proposals based on Senior Designers' instructions studies and according to quality standards and client requirements.
Key Responsibilities:
1. Generate piping drawings and associated documents such as required for the Project or proposal;
2. Execute the Piping Studies necessary for a project
3. Develop Pinal Piping General Arrangement, as per GE-A 353-03, based on layout input from Senior Designers
4. Check 3D Model drafting output
5. Check Pipe Support drafts
6. Produce layout information for 3D model drafting, and check drafted output.
7. Co-ordinate with other Disciplines so seek input and discuss development of the design and for checking on layout drawings, IDC is as per GENERAL WORKING PROCEDURE and Protocol Generate Section 1.3.
8. Ensure that all output conforms with the TPME and Project Quality Management System. Monitor QA Activities within the Division; Guide People to overcome any QA Problem they face; Carry out QA audits; Arrange QA Induction of new persons into the discipline; Update and Keep track Of QA Documents Issued by QA/ Piping Discipline.
9. Contribute towards, maintain and implement both company and client HSE Management System objectives and procedures.
10. Complying with the applicable company procedures for the Engineering Department and the Piping Discipline as they are documented in Department Working Procedure as well as those procedures in the references listed therein.
Operational Duties:
The Designer reports functionally to the Discipline Engineers and Senior Designers and operationally to an assigned Engineer or Lead Engineer depending on project size and scope.
He is responsible, within his individual Specialties, to supervise one or a group of draftsmen, depending on the importance of each contract. He will also be capable of completing and accomplishing certain duties himself, such as:
Supervising material take off activities
Co-ordination with other specialist departments
Reviewing documents and drawings before issuing
As QMR whenever assigned, responsible to ensure that the I'PAD quality system is understood by Discipline members and that the Quality Management System is implemented.
As HSE Representative, whenever assigned, responsible to ensure that the TPME HSE Management system is understood and implemented by Discipline members.
Educational Requirements:
BSc in Engineering
Experience Requirement:
Total of 6 years experience
Specific Experience Areas Piping Engineering design, offshore/onshore and Design in 3D environment
Computer Skills:
Candidate should posses basic knowledge of:Microstation ,MS Word,MS Excel,Smart Sketch
Candidate should have advanced skills in:AutoCAD,PDS (3D)
Languages:
English
Personal:
In addition, the candidate to this positon must demonstrate:
Level of Creativity/Initiative-Good
Communication Skills-Good
Analytical Skills-Good
Leadership Skills-Good
APPLY
Region Qatar
Location Doha
Contract type Temporary
Start date 23/05/11
Job description
Piping Designer
Purpose and Scope
The Piping Designer is mainly concerned with the preparation of design deliverables for projects and proposals based on Senior Designers' instructions studies and according to quality standards and client requirements.
Key Responsibilities:
1. Generate piping drawings and associated documents such as required for the Project or proposal;
2. Execute the Piping Studies necessary for a project
3. Develop Pinal Piping General Arrangement, as per GE-A 353-03, based on layout input from Senior Designers
4. Check 3D Model drafting output
5. Check Pipe Support drafts
6. Produce layout information for 3D model drafting, and check drafted output.
7. Co-ordinate with other Disciplines so seek input and discuss development of the design and for checking on layout drawings, IDC is as per GENERAL WORKING PROCEDURE and Protocol Generate Section 1.3.
8. Ensure that all output conforms with the TPME and Project Quality Management System. Monitor QA Activities within the Division; Guide People to overcome any QA Problem they face; Carry out QA audits; Arrange QA Induction of new persons into the discipline; Update and Keep track Of QA Documents Issued by QA/ Piping Discipline.
9. Contribute towards, maintain and implement both company and client HSE Management System objectives and procedures.
10. Complying with the applicable company procedures for the Engineering Department and the Piping Discipline as they are documented in Department Working Procedure as well as those procedures in the references listed therein.
Operational Duties:
The Designer reports functionally to the Discipline Engineers and Senior Designers and operationally to an assigned Engineer or Lead Engineer depending on project size and scope.
He is responsible, within his individual Specialties, to supervise one or a group of draftsmen, depending on the importance of each contract. He will also be capable of completing and accomplishing certain duties himself, such as:
Supervising material take off activities
Co-ordination with other specialist departments
Reviewing documents and drawings before issuing
As QMR whenever assigned, responsible to ensure that the I'PAD quality system is understood by Discipline members and that the Quality Management System is implemented.
As HSE Representative, whenever assigned, responsible to ensure that the TPME HSE Management system is understood and implemented by Discipline members.
Educational Requirements:
BSc in Engineering
Experience Requirement:
Total of 6 years experience
Specific Experience Areas Piping Engineering design, offshore/onshore and Design in 3D environment
Computer Skills:
Candidate should posses basic knowledge of:Microstation ,MS Word,MS Excel,Smart Sketch
Candidate should have advanced skills in:AutoCAD,PDS (3D)
Languages:
English
Personal:
In addition, the candidate to this positon must demonstrate:
Level of Creativity/Initiative-Good
Communication Skills-Good
Analytical Skills-Good
Leadership Skills-Good
APPLY
PIPING ENGINEER
Job posting reference 03353
Region Qatar
Location Doha
Contract type Permanent
Start date 23/05/11
Job description
Piping Engineer
Purpose and Scope
The Piping Engineer is responsible for executing delegated responsibilities within a project team to the effect of assisting the Senior or Lead Piping Engineer in ensuring that all design and drafting output for the Discipline is carried out on schedule, within budget and to the complete satisfaction of the Client. He reports functionally to the Senior Discipline Engineer and operationally to the Lead Discipline Engineer.
Key Responsibilities:
Be it in the context of preparation for a tender / proposal or involvement in a project as Discipline Engineer, the key responsibilities of the Piping Engineer are:
1.Performance of specific tasks on a project or proposal, as instructed by the Senior or Lead Discipline Engineer. Such tasks include preparation of:
Calculations notes,
Specifications,
Data sheets,
Reports,
Material requisitions, etc.
2. Assisting the Lead Discipline Engineer in achieving an overview and guidelines for the following:
Analysis of Piping Design Criteria
Definition of Basic Engineering inputs
Overview of Plot Plan designs
Assimilation of input from Piping engineers and other Disciplines for the execution of the Preliminary and Final Piping General Arrangements
Isometric drawings
3D Models
Piping Support
The above is to be carried out as per the following guiding documents:
GE-A 353-01: Piping CAD Drafting
GE-A 353-02: Drafting and Checking Procedure for Isometric Drawings
GE-A 353-03: Drafting and Checking Procedure for Piping General Arrangement Drawings.
GE-A 353-04: Piping Flexibility and Stress Analysis
GE-A 353-05: Piping Material Take-off
GE-A 353-06: Piping Material Codification Procedure
GE-A 353-07: Piping Design Manual
3.Execution of final checks on all Piping Documents for a project
4.Commenting on drawings and documents issued by other disciplines as well as Vendor drawings, if applicable. IDC is as per GWP A151-10 and section 1.3 of the Protocol Generale.
5.Management, maintenance and control of documents and data required for the good execution of the work. Document control procedures are as per GENERAL WORKING PROCEDUREand GENERAL WORKING PROCEDURE.
6.Definition of tasks and supervision of personnel such as Designers and Draftsmen assigned to the team, including checking of drawings produced. Final checking of drawings shall be by the Lead Discipline Engineer.
7.Reporting main developments and tasks performed.
8.Ensuring that the deliverables conform to industry standard practices and with the Quality Management System of TPME; Applying effective QA procedures to all activities throughout the production of deliverables and maintaining vigilance in their application.
9.Contributing towards, maintaining and implementing both company and client HSE Management System objectives and procedures, as specified m GENERAL WORKING PROCEDUREand the HSE Manual 1357 A - HSEM - 2
10.Conforming and contributing to the Discipline technical standards, knowledge database and Quality procedures; identifying new methodology of work process required for higher productivity.
11.Complying with the applicable company procedures for the Engineering Department and the Piping Discipline as they are documented in DEPARTMENT WORKING PROCEDURE, and DEPARTMENT WORKING PROCEDURE, respectively, as well as those procedures in the references listed therein.
Operational Duties:
Discipline Engineer on Projects, Functions are as per project scope and as assigned by the Lead Discipline Engineer and Project Manager / Project Engineer
As QMR, whenever assigned, responsible to ensure that the PPAD quality system is understood by Discipline members and that the Quality Management System is implemented.
As HSE Representative, whenever assigned, responsible to ensure that the TPME HSE Management system is understood and implemented by Discipline members.
Educational Requirements:
BSc in Engineering
Experience Requirement:
Total of 10 years experience and 3 years in Managerial Experience
Specific Experience Areas: Piping Design & Engineering activities.
Computer Skills:
Candidate should possess basic knowledge of:MS Office and Smart Plant Viewer
Candidate should have advanced skills in:Ceasar II
Languages:
English
Personal:
In addition, the candidate to this positopn must demonstrate:
Level of Creativity/Initiative-Good
Communication Skills-Good
Analytical Skills-Good
Leadership Skills-Good
APPLY
Region Qatar
Location Doha
Contract type Permanent
Start date 23/05/11
Job description
Piping Engineer
Purpose and Scope
The Piping Engineer is responsible for executing delegated responsibilities within a project team to the effect of assisting the Senior or Lead Piping Engineer in ensuring that all design and drafting output for the Discipline is carried out on schedule, within budget and to the complete satisfaction of the Client. He reports functionally to the Senior Discipline Engineer and operationally to the Lead Discipline Engineer.
Key Responsibilities:
Be it in the context of preparation for a tender / proposal or involvement in a project as Discipline Engineer, the key responsibilities of the Piping Engineer are:
1.Performance of specific tasks on a project or proposal, as instructed by the Senior or Lead Discipline Engineer. Such tasks include preparation of:
Calculations notes,
Specifications,
Data sheets,
Reports,
Material requisitions, etc.
2. Assisting the Lead Discipline Engineer in achieving an overview and guidelines for the following:
Analysis of Piping Design Criteria
Definition of Basic Engineering inputs
Overview of Plot Plan designs
Assimilation of input from Piping engineers and other Disciplines for the execution of the Preliminary and Final Piping General Arrangements
Isometric drawings
3D Models
Piping Support
The above is to be carried out as per the following guiding documents:
GE-A 353-01: Piping CAD Drafting
GE-A 353-02: Drafting and Checking Procedure for Isometric Drawings
GE-A 353-03: Drafting and Checking Procedure for Piping General Arrangement Drawings.
GE-A 353-04: Piping Flexibility and Stress Analysis
GE-A 353-05: Piping Material Take-off
GE-A 353-06: Piping Material Codification Procedure
GE-A 353-07: Piping Design Manual
3.Execution of final checks on all Piping Documents for a project
4.Commenting on drawings and documents issued by other disciplines as well as Vendor drawings, if applicable. IDC is as per GWP A151-10 and section 1.3 of the Protocol Generale.
5.Management, maintenance and control of documents and data required for the good execution of the work. Document control procedures are as per GENERAL WORKING PROCEDUREand GENERAL WORKING PROCEDURE.
6.Definition of tasks and supervision of personnel such as Designers and Draftsmen assigned to the team, including checking of drawings produced. Final checking of drawings shall be by the Lead Discipline Engineer.
7.Reporting main developments and tasks performed.
8.Ensuring that the deliverables conform to industry standard practices and with the Quality Management System of TPME; Applying effective QA procedures to all activities throughout the production of deliverables and maintaining vigilance in their application.
9.Contributing towards, maintaining and implementing both company and client HSE Management System objectives and procedures, as specified m GENERAL WORKING PROCEDUREand the HSE Manual 1357 A - HSEM - 2
10.Conforming and contributing to the Discipline technical standards, knowledge database and Quality procedures; identifying new methodology of work process required for higher productivity.
11.Complying with the applicable company procedures for the Engineering Department and the Piping Discipline as they are documented in DEPARTMENT WORKING PROCEDURE, and DEPARTMENT WORKING PROCEDURE, respectively, as well as those procedures in the references listed therein.
Operational Duties:
Discipline Engineer on Projects, Functions are as per project scope and as assigned by the Lead Discipline Engineer and Project Manager / Project Engineer
As QMR, whenever assigned, responsible to ensure that the PPAD quality system is understood by Discipline members and that the Quality Management System is implemented.
As HSE Representative, whenever assigned, responsible to ensure that the TPME HSE Management system is understood and implemented by Discipline members.
Educational Requirements:
BSc in Engineering
Experience Requirement:
Total of 10 years experience and 3 years in Managerial Experience
Specific Experience Areas: Piping Design & Engineering activities.
Computer Skills:
Candidate should possess basic knowledge of:MS Office and Smart Plant Viewer
Candidate should have advanced skills in:Ceasar II
Languages:
English
Personal:
In addition, the candidate to this positopn must demonstrate:
Level of Creativity/Initiative-Good
Communication Skills-Good
Analytical Skills-Good
Leadership Skills-Good
APPLY
SENIOR PIPING ENGINEER
Job posting reference 03365
Region Qatar
Location Doha
Contract type Permanent
Start date 23/05/11
Job description
Description of main tasks tobe accomplished:
To lead a team of Piping Engineers and Designers in executing piping activities such as piping design (layout), stress analysis, support engineering, piping materials and site survey.
Participate in design review. Interdiscipline coordination.
Manhour estimate / control, scheduling and goal achievement.
review of vendor drawings.
Technical bid evaluation.
Quality assurance.
Educational Requirements:
BE/BTech/BS in Mechanical Engineering
Nature of Experience Requirement:
Total of 15 - 20years experience in the Oil&Gas On/Offshore field,refinery,chemical,etc.
Good knowledge in international codes and standards.
Good written & oral communication skills
Good leadership qualities and ability to build a team.
Computer Skills:
Candidate should posses basic knowledge of: CAESAR II and SPR and exposure/knowledge in draughting tools.
Level of Creativity/Initiative- VeryGood
Communication Skills-Very Good
Analytical Skills-Very Good
Leadership Skills-Very Good
APPLY
Region Qatar
Location Doha
Contract type Permanent
Start date 23/05/11
Job description
Description of main tasks tobe accomplished:
To lead a team of Piping Engineers and Designers in executing piping activities such as piping design (layout), stress analysis, support engineering, piping materials and site survey.
Participate in design review. Interdiscipline coordination.
Manhour estimate / control, scheduling and goal achievement.
review of vendor drawings.
Technical bid evaluation.
Quality assurance.
Educational Requirements:
BE/BTech/BS in Mechanical Engineering
Nature of Experience Requirement:
Total of 15 - 20years experience in the Oil&Gas On/Offshore field,refinery,chemical,etc.
Good knowledge in international codes and standards.
Good written & oral communication skills
Good leadership qualities and ability to build a team.
Computer Skills:
Candidate should posses basic knowledge of: CAESAR II and SPR and exposure/knowledge in draughting tools.
Level of Creativity/Initiative- VeryGood
Communication Skills-Very Good
Analytical Skills-Very Good
Leadership Skills-Very Good
APPLY
SENIOR PIPING DESIGNER
Job posting reference 03363
Region Qatar
Location Doha
Contract type Contract
Start date Immediate
Job description
Senior Piping Designer
Purpose and Scope
The Senior Designer in the Piping Discipline is primarily concerned with the preparation engineering drawings, design documents for projects and proposals, and to do so as per client requirements and in accordance with the company Quality Management System.
Key Responsibilities:
Revise design information within contract specifications, regulatory requirements, operational and environmental conditions; and design support data, to ensure that adequate information is available to complete the design.
Organize, design and ensure the drafting and checking of Piping drawings and Schedules for a given project,
Develop Plot Plans
Develop Piping GAD's;
Provide layout content to Designers for the production of the Preliminary and Final Piping General Arrangement, as per (GE-A 353-03;
Provide basic content for the drafting of Isometric Drawings; Preparing Isometric Sketches In 21) design, following the procedures stated in GE-A 353-01 for drafting and checking Isometric Drawings;
Prepare layout information for Piping Support, design and stress analysis, in coordination with the support specialist
Produce layout information for 3D model drafting.
Co-ordinate with other Disciplines to seek input and discuss development of the design and for checking on layout drawings, IDC is as per GWP A151-10 and Protocol Generate Section 1,3
Monitor progress and man-hours within the group
Attend coordination meeting either internally or with the client
Check Piping documents before Construction Issue
Contribute to the conceptual and basic design evaluation of a project; Assist in the preparation of proposals.
Undertake site visits to collect and prepare reports
Assist the Lead Discipline Engineer in the preparation of the Document Register. Document Control procedures are as defined in GWP A 302-06 and GWP A 302-10.
Assist the Lead Engineer on Vendor drawing reviews.
Ensure the completion of design tasks on schedule and within allocated hours.
Ensure that all output conforms with the TPAD and Project Quality Management System.
Ensuring that team members perform according to TPME Quality Assurance procedures.
Contributing towards, maintaining and implementing both company and client HSE Management System objectives and procedures, as specified in GWP A 302 -16 2 and the HSE Manual 1357 A - HSEM – 2
Complying with the applicable company procedures for the Engineering Department and the Piping Discipline as they are documented in DWP A 302 - 02, and DWP A 353-01 respectively, as well as those procedures in the references listed therein.
Operational Duties:
As Lead Designer on a project, the Senior Designer is mainly responsible for:
Executing Plot Plan design, based on overview input from the bead Piping Engineer.
Checking the Piping Studies output produced by Designers
Providing layout content to Designers for the production of the Preliminary Piping General Arrangement
Depending on project –size and scope, the Senior Designer may organize and manage one or several groups of Designers and Draftsmen
As Group Leader, the Lead Designer is responsible, within his individual specialities, to supervise one or a group of designers, depending on the importance of each contract. He will also be capable of completing and accomplishing certain duties himself:
Supervise material take off activities
Control and update the classification of documents used throughout the contract
The organization, distribution and co-ordination of duties within their section
Co-ordination with drafting office and other specialist departments
Review documents and drawings before issuing
As QMR, whenever assigned, responsible to ensure that the TPME quality system is understood by Discipline members and that the Quality Management System is implemented.
As HSE Representative, whenever assigned, responsible to ensure that the TPME HSE Management system is understood and implemented by Discipline members.
Experience Requirement:
Total of 10 years experience and 5 years in Managerial Experience
Specific Experience Areas: Piping Engineering Design, offshore studies, Design in 3D Environment, Coordination.
Computer Skills:
Candidate should possess basic knowledge of:MS Word,MS Excel,Microstation 2D
Candidate should have advanced skills in: AutoCAD,PDS 3D,Smart Plant Viewer
Languages:
English
Personal:
In addition, the candidate to this positopn must demonstrate:
Level of Creativity/Initiative-Good
Communication Skills-Good
Analytical Skills-Good
Leadership Skills-Good
APPLY
Region Qatar
Location Doha
Contract type Contract
Start date Immediate
Job description
Senior Piping Designer
Purpose and Scope
The Senior Designer in the Piping Discipline is primarily concerned with the preparation engineering drawings, design documents for projects and proposals, and to do so as per client requirements and in accordance with the company Quality Management System.
Key Responsibilities:
Revise design information within contract specifications, regulatory requirements, operational and environmental conditions; and design support data, to ensure that adequate information is available to complete the design.
Organize, design and ensure the drafting and checking of Piping drawings and Schedules for a given project,
Develop Plot Plans
Develop Piping GAD's;
Provide layout content to Designers for the production of the Preliminary and Final Piping General Arrangement, as per (GE-A 353-03;
Provide basic content for the drafting of Isometric Drawings; Preparing Isometric Sketches In 21) design, following the procedures stated in GE-A 353-01 for drafting and checking Isometric Drawings;
Prepare layout information for Piping Support, design and stress analysis, in coordination with the support specialist
Produce layout information for 3D model drafting.
Co-ordinate with other Disciplines to seek input and discuss development of the design and for checking on layout drawings, IDC is as per GWP A151-10 and Protocol Generate Section 1,3
Monitor progress and man-hours within the group
Attend coordination meeting either internally or with the client
Check Piping documents before Construction Issue
Contribute to the conceptual and basic design evaluation of a project; Assist in the preparation of proposals.
Undertake site visits to collect and prepare reports
Assist the Lead Discipline Engineer in the preparation of the Document Register. Document Control procedures are as defined in GWP A 302-06 and GWP A 302-10.
Assist the Lead Engineer on Vendor drawing reviews.
Ensure the completion of design tasks on schedule and within allocated hours.
Ensure that all output conforms with the TPAD and Project Quality Management System.
Ensuring that team members perform according to TPME Quality Assurance procedures.
Contributing towards, maintaining and implementing both company and client HSE Management System objectives and procedures, as specified in GWP A 302 -16 2 and the HSE Manual 1357 A - HSEM – 2
Complying with the applicable company procedures for the Engineering Department and the Piping Discipline as they are documented in DWP A 302 - 02, and DWP A 353-01 respectively, as well as those procedures in the references listed therein.
Operational Duties:
As Lead Designer on a project, the Senior Designer is mainly responsible for:
Executing Plot Plan design, based on overview input from the bead Piping Engineer.
Checking the Piping Studies output produced by Designers
Providing layout content to Designers for the production of the Preliminary Piping General Arrangement
Depending on project –size and scope, the Senior Designer may organize and manage one or several groups of Designers and Draftsmen
As Group Leader, the Lead Designer is responsible, within his individual specialities, to supervise one or a group of designers, depending on the importance of each contract. He will also be capable of completing and accomplishing certain duties himself:
Supervise material take off activities
Control and update the classification of documents used throughout the contract
The organization, distribution and co-ordination of duties within their section
Co-ordination with drafting office and other specialist departments
Review documents and drawings before issuing
As QMR, whenever assigned, responsible to ensure that the TPME quality system is understood by Discipline members and that the Quality Management System is implemented.
As HSE Representative, whenever assigned, responsible to ensure that the TPME HSE Management system is understood and implemented by Discipline members.
Experience Requirement:
Total of 10 years experience and 5 years in Managerial Experience
Specific Experience Areas: Piping Engineering Design, offshore studies, Design in 3D Environment, Coordination.
Computer Skills:
Candidate should possess basic knowledge of:MS Word,MS Excel,Microstation 2D
Candidate should have advanced skills in: AutoCAD,PDS 3D,Smart Plant Viewer
Languages:
English
Personal:
In addition, the candidate to this positopn must demonstrate:
Level of Creativity/Initiative-Good
Communication Skills-Good
Analytical Skills-Good
Leadership Skills-Good
APPLY
SENIOR CIVIL DESIGNER
Job posting reference 03372
Region Qatar
Location Doha
Contract type Permanent
Start date 24/05/11
Job description
Senior Civil Designer
Purpose and Scope
The Senior Designer in the Civil Discipline is primarily concerned with the preparation of Civil engineering drawings, design documents and calculations for projects, tenders and proposals, as per client requirements and in accordance with the TPME Quality Policy.
Key Responsibilities:
1. Revision of design information within contract specifications; regulatory requirements; operational and environmental conditions; and design support data, to ensure that adequate information is available to complete the design.
2. Co-ordination between designers/draftsmen to ensure the organization, design and drafting of Civil Engineering drawings. Material Take-Off and Schedules for a given project. Output includes:
Compiling the documentation necessary for the issue of Detailed Drawings
Assisting in the preparation and checking of drawings and MTO issued by drafting office (Civil) as per calculation notes and provision of the necessary input to Designers / Draftsmen
Assisting in the issue of calculation reports for secondary items.
Executing main architectural drawings
Executing and checking Designers' output with respect to the overall and final Key Plans, Area Drawings, General Longitudinal & Transversal Profiles and Final MTO's in what relates to service buildings civil engineering.
Collecting all the information required to generate drawings from other Disciplines and ensuring the feasibility and construct-ability of the same.
Co-ordination of PDS frameworks structural modelling and checking of the same.
3. Undertaking site visits for data collection purposes and reporting on site queries to Lead Discipline Engineer.
4. Co-ordination within Disciplines for checking layout drawings; Checking back-drafted drawings for compliance with QA standards and procedures; Achieving Inter-Discipline checks as per interdisciplinary tasks stated in Protocol General Section 1.3 and in GENERAL WORKING PROCEDURE; - Issuing IDC revisions, other Discipline comments marked in the IDC issue and master drawings; Issuing final drawings to the client.
5. Assisting the Lead Engineer on Vendor drawing reviews
6. Participation in proposal, tender or projects estimations in what relates to electrical engineering items.
7. Preparation of project documentation as per QA procedures, and assisting the Lead Engineer in the preparation of the Document Register. Document Control procedures are as defined in GWP GENERAL WORKING PROCEDURE.
8.Providing feedback to Lead Engineers on client/site/vendor queries.
9.Planning drawing deliverables in line with schedule requirements;
10. Providing technical support to draftsmen.
11. Ensuring that team members perform according to TPME Quality Assurance procedures.
12. Contributing towards, maintaining and implement both company and client HSE Management System objectives and procedures, as specified in GENERAL WORKING PROCEDURE and the HSE Manual 1357 A - HSEM - 2
13. Complying with the applicable company procedures for the Engineering Department and the Civil Discipline as they are documented in DEPARTMENT WORKING PROCEDURE respectively, as well as those procedures in the references listed therein
Operational Duties:
Senior Designer on projects:
Depending on project size and scope, the Senior Designer may organize and manage one or several groups of Designers and Draftsmen.
He reports to the Discipline Engineer or to the Lead Discipline Engineer, again depending on project size.
As QMR, whenever assigned, responsible to ensure that the TPME quality system is understood by Discipline members and that the Quality Management System is implemented.
As HSE Representative, whenever assigned, responsible to ensure that the TPME HSE Management system is understood and implemented by Discipline members.
Experience Requirement:
Total of 15 years of experience and 3 years in Managerial Experience
Specific Experience Areas: Building architectural, steel and concrete structures; Site development and underground service.
Computer Skills:
Candidate should posses basic knowledge of:MS Office
Candidate should have advanced skills in: AutoCAD, Microstation,PDS Framework
Languages:
English
Personal:
In addition, the candidate to this positon must demonstrate:
Level of Creativity/Initiative-Very Good
Communication Skills-Very Good
Leadership Skills-Very Good
APPLY
Region Qatar
Location Doha
Contract type Permanent
Start date 24/05/11
Job description
Senior Civil Designer
Purpose and Scope
The Senior Designer in the Civil Discipline is primarily concerned with the preparation of Civil engineering drawings, design documents and calculations for projects, tenders and proposals, as per client requirements and in accordance with the TPME Quality Policy.
Key Responsibilities:
1. Revision of design information within contract specifications; regulatory requirements; operational and environmental conditions; and design support data, to ensure that adequate information is available to complete the design.
2. Co-ordination between designers/draftsmen to ensure the organization, design and drafting of Civil Engineering drawings. Material Take-Off and Schedules for a given project. Output includes:
Compiling the documentation necessary for the issue of Detailed Drawings
Assisting in the preparation and checking of drawings and MTO issued by drafting office (Civil) as per calculation notes and provision of the necessary input to Designers / Draftsmen
Assisting in the issue of calculation reports for secondary items.
Executing main architectural drawings
Executing and checking Designers' output with respect to the overall and final Key Plans, Area Drawings, General Longitudinal & Transversal Profiles and Final MTO's in what relates to service buildings civil engineering.
Collecting all the information required to generate drawings from other Disciplines and ensuring the feasibility and construct-ability of the same.
Co-ordination of PDS frameworks structural modelling and checking of the same.
3. Undertaking site visits for data collection purposes and reporting on site queries to Lead Discipline Engineer.
4. Co-ordination within Disciplines for checking layout drawings; Checking back-drafted drawings for compliance with QA standards and procedures; Achieving Inter-Discipline checks as per interdisciplinary tasks stated in Protocol General Section 1.3 and in GENERAL WORKING PROCEDURE; - Issuing IDC revisions, other Discipline comments marked in the IDC issue and master drawings; Issuing final drawings to the client.
5. Assisting the Lead Engineer on Vendor drawing reviews
6. Participation in proposal, tender or projects estimations in what relates to electrical engineering items.
7. Preparation of project documentation as per QA procedures, and assisting the Lead Engineer in the preparation of the Document Register. Document Control procedures are as defined in GWP GENERAL WORKING PROCEDURE.
8.Providing feedback to Lead Engineers on client/site/vendor queries.
9.Planning drawing deliverables in line with schedule requirements;
10. Providing technical support to draftsmen.
11. Ensuring that team members perform according to TPME Quality Assurance procedures.
12. Contributing towards, maintaining and implement both company and client HSE Management System objectives and procedures, as specified in GENERAL WORKING PROCEDURE and the HSE Manual 1357 A - HSEM - 2
13. Complying with the applicable company procedures for the Engineering Department and the Civil Discipline as they are documented in DEPARTMENT WORKING PROCEDURE respectively, as well as those procedures in the references listed therein
Operational Duties:
Senior Designer on projects:
Depending on project size and scope, the Senior Designer may organize and manage one or several groups of Designers and Draftsmen.
He reports to the Discipline Engineer or to the Lead Discipline Engineer, again depending on project size.
As QMR, whenever assigned, responsible to ensure that the TPME quality system is understood by Discipline members and that the Quality Management System is implemented.
As HSE Representative, whenever assigned, responsible to ensure that the TPME HSE Management system is understood and implemented by Discipline members.
Experience Requirement:
Total of 15 years of experience and 3 years in Managerial Experience
Specific Experience Areas: Building architectural, steel and concrete structures; Site development and underground service.
Computer Skills:
Candidate should posses basic knowledge of:MS Office
Candidate should have advanced skills in: AutoCAD, Microstation,PDS Framework
Languages:
English
Personal:
In addition, the candidate to this positon must demonstrate:
Level of Creativity/Initiative-Very Good
Communication Skills-Very Good
Leadership Skills-Very Good
APPLY
SENIOR PIPING DESIGNER
Job posting reference 03374
Region Qatar
Location Doha
Contract type Permanent
Start date Immediate
Job description
Senior Piping Designer
Purpose and Scope
The Senior Designer in the Piping Discipline is primarily concerned with the preparation engineering drawings, design documents for projects and proposals, and to do so as per client requirements and in accordance with the company Quality Management System.
Key Responsibilities:
1. Revise design information within contract specifications, regulatory requirements, operational and environmental conditions; and design support data, to ensure that adequate information is available to complete the design.
2.Organize, design and ensure the drafting and checking of Piping drawings and Schedules for a given project,
3.Develop Plot Plans
4.Develop Piping GAD's;
5.Provide layout content to Designers for the production of the Preliminary and Final Piping General Arrangement, as per (GE-A 353-03;
6.Provide basic content for the drafting of Isometric Drawings; Preparing Isometric Sketches In 21) design, following the procedures stated in GE-A 353-01 for drafting and checking Isometric Drawings;
7.Prepare layout information for Piping Support, design and stress analysis, in coordination with the support specialist
8.Produce layout information for 3D model drafting.
9.Co-ordinate with other Disciplines to seek input and discuss development of the design and for checking on layout drawings, IDC is as per GWP A151-10 and Protocol Generate Section 1,3
10. Monitor progress and man-hours within the group
11. Attend coordination meeting either internally or with the client
12.Check Piping documents before Construction Issue
13.Contribute to the conceptual and basic design evaluation of a project; Assist in the preparation of proposals.
14.Undertake site visits to collect and prepare reports
15.Assist the Lead Discipline Engineer in the preparation of the Document Register. Document Control procedures are as defined in GWP A 302-06 and GWP A 302-10.
16.Assist the Lead Engineer on Vendor drawing reviews.
17.Ensure the completion of design tasks on schedule and within allocated hours.
18.Ensure that all output conforms with the TPAD and Project Quality Management System.
19. Ensuring that team members perform according to TPME Quality Assurance procedures.
20. Contributing towards, maintaining and implementing both company and client HSE Management System objectives and procedures, as specified in GWP A 302 -16 2 and the HSE Manual 1357 A - HSEM – 2
21.Complying with the applicable company procedures for the Engineering Department and the Piping Discipline as they are documented in DWP A 302 - 02, and DWP A 353-01 respectively, as well as those procedures in the references listed therein.
Operational Duties:
As Lead Designer on a project, the Senior Designer is mainly responsible for:
Executing Plot Plan design, based on overview input from the bead Piping Engineer.
Checking the Piping Studies output produced by Designers
Providing layout content to Designers for the production of the Preliminary Piping General Arrangement
Depending on project –size and scope, the Senior Designer may organize and manage one or several groups of Designers and Draftsmen
As Group Leader, the Lead Designer is responsible, within his individual specialities, to supervise one or a group of designers, depending on the importance of each contract. He will also be capable of completing and accomplishing certain duties himself:
Supervise material take off activities
Control and update the classification of documents used throughout the contract
The organization, distribution and co-ordination of duties within their section
Co-ordination with drafting office and other specialist departments
Review documents and drawings before issuing
As QMR, whenever assigned, responsible to ensure that the TPME quality system is understood by Discipline members and that the Quality Management System is implemented.
As HSE Representative, whenever assigned, responsible to ensure that the TPME HSE Management system is understood and implemented by Discipline members.
Experience Requirement:
Total of 10 years experience and 5 years in Managerial Experience
Specific Experience Areas: Piping Engineering Design, offshore studies, Design in 3D Environment, Coordination.
Computer Skills:
Candidate should possess basic knowledge of:MS Word,MS Excel,Microstation 2D
Candidate should have advanced skills in: AutoCAD,PDS 3D,Smart Plant Viewer
Languages:
English
Personal:
In addition, the candidate to this positopn must demonstrate:
Level of Creativity/Initiative-Good
Communication Skills-Good
Analytical Skills-Good
Leadership Skills-Good
APPLY
Region Qatar
Location Doha
Contract type Permanent
Start date Immediate
Job description
Senior Piping Designer
Purpose and Scope
The Senior Designer in the Piping Discipline is primarily concerned with the preparation engineering drawings, design documents for projects and proposals, and to do so as per client requirements and in accordance with the company Quality Management System.
Key Responsibilities:
1. Revise design information within contract specifications, regulatory requirements, operational and environmental conditions; and design support data, to ensure that adequate information is available to complete the design.
2.Organize, design and ensure the drafting and checking of Piping drawings and Schedules for a given project,
3.Develop Plot Plans
4.Develop Piping GAD's;
5.Provide layout content to Designers for the production of the Preliminary and Final Piping General Arrangement, as per (GE-A 353-03;
6.Provide basic content for the drafting of Isometric Drawings; Preparing Isometric Sketches In 21) design, following the procedures stated in GE-A 353-01 for drafting and checking Isometric Drawings;
7.Prepare layout information for Piping Support, design and stress analysis, in coordination with the support specialist
8.Produce layout information for 3D model drafting.
9.Co-ordinate with other Disciplines to seek input and discuss development of the design and for checking on layout drawings, IDC is as per GWP A151-10 and Protocol Generate Section 1,3
10. Monitor progress and man-hours within the group
11. Attend coordination meeting either internally or with the client
12.Check Piping documents before Construction Issue
13.Contribute to the conceptual and basic design evaluation of a project; Assist in the preparation of proposals.
14.Undertake site visits to collect and prepare reports
15.Assist the Lead Discipline Engineer in the preparation of the Document Register. Document Control procedures are as defined in GWP A 302-06 and GWP A 302-10.
16.Assist the Lead Engineer on Vendor drawing reviews.
17.Ensure the completion of design tasks on schedule and within allocated hours.
18.Ensure that all output conforms with the TPAD and Project Quality Management System.
19. Ensuring that team members perform according to TPME Quality Assurance procedures.
20. Contributing towards, maintaining and implementing both company and client HSE Management System objectives and procedures, as specified in GWP A 302 -16 2 and the HSE Manual 1357 A - HSEM – 2
21.Complying with the applicable company procedures for the Engineering Department and the Piping Discipline as they are documented in DWP A 302 - 02, and DWP A 353-01 respectively, as well as those procedures in the references listed therein.
Operational Duties:
As Lead Designer on a project, the Senior Designer is mainly responsible for:
Executing Plot Plan design, based on overview input from the bead Piping Engineer.
Checking the Piping Studies output produced by Designers
Providing layout content to Designers for the production of the Preliminary Piping General Arrangement
Depending on project –size and scope, the Senior Designer may organize and manage one or several groups of Designers and Draftsmen
As Group Leader, the Lead Designer is responsible, within his individual specialities, to supervise one or a group of designers, depending on the importance of each contract. He will also be capable of completing and accomplishing certain duties himself:
Supervise material take off activities
Control and update the classification of documents used throughout the contract
The organization, distribution and co-ordination of duties within their section
Co-ordination with drafting office and other specialist departments
Review documents and drawings before issuing
As QMR, whenever assigned, responsible to ensure that the TPME quality system is understood by Discipline members and that the Quality Management System is implemented.
As HSE Representative, whenever assigned, responsible to ensure that the TPME HSE Management system is understood and implemented by Discipline members.
Experience Requirement:
Total of 10 years experience and 5 years in Managerial Experience
Specific Experience Areas: Piping Engineering Design, offshore studies, Design in 3D Environment, Coordination.
Computer Skills:
Candidate should possess basic knowledge of:MS Word,MS Excel,Microstation 2D
Candidate should have advanced skills in: AutoCAD,PDS 3D,Smart Plant Viewer
Languages:
English
Personal:
In addition, the candidate to this positopn must demonstrate:
Level of Creativity/Initiative-Good
Communication Skills-Good
Analytical Skills-Good
Leadership Skills-Good
APPLY
CIVIL/ STRUCTURAL DESIGNER
Job posting reference 03337
Region Qatar
Location Doha
Contract type Permanent
Start date 15/06/11
Job description
Purpose and Scope
The Civil Designer is mainly concerned with the preparation of design deliverables for projects, tenders or proposals based on Engineers and Senior Designers' plans and according to TPAD Quality Standards and the client requirements for the project.
Key Responsibilities:
Organisation and co-ordination of design or drafting duties. Output includes:
Detailed Drawings
Final MTO's
Key Plans for civil service buildings
Architectural drawings
Final Area Drawings
Detailed Longitudinal & Transversal Profiles
Development of drawings, models and documents listed above using CAD systems, as required for the Project or Proposal; Modelling structural steelwork on PDS Framework and Microstation check compatibility with steelwork drawings
Check of drawing accuracy, working lines, working points, dimensions, fouling in co-ordination with Senior Designer, head Engineer, Discipline Engineer and other Disciplines
Revision of other discipline drawings/documents for IDC when required and as per inter-disciplinary tasks stated in Protocol General Section 1.3 and in GWP A 151-10.; Checking back-drafted drawings for compliance with QA standards and procedures when required;
Ensuring that all drawings and documents are in accordance with Quality Procedures; Maintain IOC records as per Company Quality Procedures
Completion of deliverables on schedule and within the hours allocated.
Providing feedback to Lead Engineers on client/site/vendor queries
Planning drawing deliverables in line with schedule requirements
Providing technical support to draftsmen.
Contributing towards, maintaining and implementing both company and client USE Management System objectives and procedures, as specified in GWP A 302 -16 2 and the HSE Manual 1357 A -
HSEM - 2
Complying with the applicable company procedures for the Engineering Department and the Civil
Educational Requirements: Diploma in Civil Engineering Drafting
Experience Requirement:
Total Years 7 Managerial Experience
Specific Experience Areas Design of steel and concrete drawings for buildings
and structures-5 years
Proven Experience in:
Computer Skills
Candidate should possess knowledge of
MS Office AutoCad
Microstation PDS Framework
Languages
Candidate should have excellent command of:
English, Arabic, French, German, Farsi / Persian
Candidate should have working knowledge of
English, Arabic, French, German, Farsi.' Persian
APPLY
Region Qatar
Location Doha
Contract type Permanent
Start date 15/06/11
Job description
Purpose and Scope
The Civil Designer is mainly concerned with the preparation of design deliverables for projects, tenders or proposals based on Engineers and Senior Designers' plans and according to TPAD Quality Standards and the client requirements for the project.
Key Responsibilities:
Organisation and co-ordination of design or drafting duties. Output includes:
Detailed Drawings
Final MTO's
Key Plans for civil service buildings
Architectural drawings
Final Area Drawings
Detailed Longitudinal & Transversal Profiles
Development of drawings, models and documents listed above using CAD systems, as required for the Project or Proposal; Modelling structural steelwork on PDS Framework and Microstation check compatibility with steelwork drawings
Check of drawing accuracy, working lines, working points, dimensions, fouling in co-ordination with Senior Designer, head Engineer, Discipline Engineer and other Disciplines
Revision of other discipline drawings/documents for IDC when required and as per inter-disciplinary tasks stated in Protocol General Section 1.3 and in GWP A 151-10.; Checking back-drafted drawings for compliance with QA standards and procedures when required;
Ensuring that all drawings and documents are in accordance with Quality Procedures; Maintain IOC records as per Company Quality Procedures
Completion of deliverables on schedule and within the hours allocated.
Providing feedback to Lead Engineers on client/site/vendor queries
Planning drawing deliverables in line with schedule requirements
Providing technical support to draftsmen.
Contributing towards, maintaining and implementing both company and client USE Management System objectives and procedures, as specified in GWP A 302 -16 2 and the HSE Manual 1357 A -
HSEM - 2
Complying with the applicable company procedures for the Engineering Department and the Civil
Educational Requirements: Diploma in Civil Engineering Drafting
Experience Requirement:
Total Years 7 Managerial Experience
Specific Experience Areas Design of steel and concrete drawings for buildings
and structures-5 years
Proven Experience in:
Computer Skills
Candidate should possess knowledge of
MS Office AutoCad
Microstation PDS Framework
Languages
Candidate should have excellent command of:
English, Arabic, French, German, Farsi / Persian
Candidate should have working knowledge of
English, Arabic, French, German, Farsi.' Persian
APPLY
CIVIL ENGINEER
Job posting reference 03382
Region Qatar
Location Doha
Contract type Permanent
Start date Immediate
Job description
Civil Engineer
Purpose and Scope
The Civil Engineer is responsible for executing delegated responsibilities within a project team to the effect of assisting the Senior or Lead Civil Equipment Engineer in ensuring that all design and drafting output for the Discipline is carried out on schedule, within budget, based on sound civil engineering practice. design codes and standards, and to the complete satisfaction of the Client. He reports functionally to the Senior Discipline Engineer and operationally to the Lead Discipline Engineer.
Key Responsibilities:
1.Executing, as instructed by the Lead Engineer, all the tasks that are necessary to ensure the design and correct procurement for onshore structures, architecture and civil engineering services on a project, The Discipline Engineer is entrusted to:
Prepare conceptual designs (Structural sketches and preliminary sizing) as per the Lead Engineer's requirements
Issue Structural calculation reports
Issue Main Structural Sizing
Prepare and review material take off, material requisitions and purchase orders for civil commodities.
Prepare and check design reports and calculations for Civil works.
Prepare and review calculations and designs of Civil / Structural Engineering activities to ensure conformity with job specifications, codes and standards.
Provide design data and sketches required for drafting and supervise designers and draftsmen assigned to the project. Duties include checking of construct-ability and material specifications documents
Comment on IOC documents from other Disciplines and vendors
Carry out site visits for data collection and surveys
Assist the Project Lead Engineer in the preparation of technical bid evaluation for civil sub-contracts
Review drawings from other Disciplines, All design review procedures are as per GENERAL WORKING PROCEDURE
Assist in issuing the Discipline closeout report.
Specific design procedures for the Civil Design Checking practice are as defined in GF: A 357 01
2.Definition of (asks and supervision of personnel assigned to the team, including checking of drawings produced. Pinal checking of drawings shall be by the Lead Discipline Engineer.
3.Coordination with Engineers from other Disciplines for the inter-disciplinary tasks stated in Protocol General Section 1.3 and in GENERAL WORKING PROCEDURE
4.Assisting in the planning and implementation of the Project to meet schedule and budget requirements
5.Assisting in the management, maintenance and control of documents and data required for the good execution of the work. Document Control procedures are as defined inGENERAL WORKING PROCEDURE
6.Participate in coordination meetings (both internally and with clients and vendors)
7.Providing Civil Engineering support to site engineers on technical query issues
8.Coordination with client engineers on Static Equipment engineering issues
9.Providing support in the Static Equipment area for procurement activities
10.Assisting in the preparation of project proposals and pre-qualification documents in what relates to Static Equipment engineering design (preparation of calculations notes, specifications, data sheets, reports, material requisitions, budget man-hours, etc,)
11.Contributing towards, maintaining and implementing both company, and client HSE Management System objectives and procedures, as specified in GENERAL WORKING PROCEDURE and the HSE Manual 1357 A -HS EM – 2
12.Assisting in Software Spread sheet development for authorized engineering calculations.
13.Complying with the applicable company procedures for the Engineering Department and the Civil Discipline as they are documented in DEPARTMENT WORKING PROCEDURErespectively, as well as those procedures in the references listed therein.
Operational Duties:
Discipline Engineer on Projects. Functions are as per project scope and as assigned by the Lead Discipline Engineer and Project Manager / Project Engineer.
As QMR, whenever assigned, responsible to ensure that the TPME quality system is understood by Discipline members, and that the Quality Management System is implemented.
As HSE Representative, whenever assigned, responsible to ensure that the TPME HSE Management system is understood and implemented by Discipline members.
Educational Requirements:
BSc Degree in Civil/Structure Engineering
Master’s Degree an asset
Experience Requirement:
Total of 5 to 10 years experience
Specific Experience Areas:
5 years in Detailed design of Civil works for Oil/Gas/Petrochemical facilities
2 years in construction supervision exposure an asset.
Computer Skills:
Candidate should possess basic knowledge of: MS Office,SACS(an asset),SAP Series(an asset)
Candidate should have advanced skills in: STAAD III
Languages:
English
Personal:
In addition, the candidate to this positon must demonstrate:
Level of Creativity/Initiative-Good
Communication Skills-Good
Analytical Skills-Very Good
Leadership Skills-Good
APPLY
Region Qatar
Location Doha
Contract type Permanent
Start date Immediate
Job description
Civil Engineer
Purpose and Scope
The Civil Engineer is responsible for executing delegated responsibilities within a project team to the effect of assisting the Senior or Lead Civil Equipment Engineer in ensuring that all design and drafting output for the Discipline is carried out on schedule, within budget, based on sound civil engineering practice. design codes and standards, and to the complete satisfaction of the Client. He reports functionally to the Senior Discipline Engineer and operationally to the Lead Discipline Engineer.
Key Responsibilities:
1.Executing, as instructed by the Lead Engineer, all the tasks that are necessary to ensure the design and correct procurement for onshore structures, architecture and civil engineering services on a project, The Discipline Engineer is entrusted to:
Prepare conceptual designs (Structural sketches and preliminary sizing) as per the Lead Engineer's requirements
Issue Structural calculation reports
Issue Main Structural Sizing
Prepare and review material take off, material requisitions and purchase orders for civil commodities.
Prepare and check design reports and calculations for Civil works.
Prepare and review calculations and designs of Civil / Structural Engineering activities to ensure conformity with job specifications, codes and standards.
Provide design data and sketches required for drafting and supervise designers and draftsmen assigned to the project. Duties include checking of construct-ability and material specifications documents
Comment on IOC documents from other Disciplines and vendors
Carry out site visits for data collection and surveys
Assist the Project Lead Engineer in the preparation of technical bid evaluation for civil sub-contracts
Review drawings from other Disciplines, All design review procedures are as per GENERAL WORKING PROCEDURE
Assist in issuing the Discipline closeout report.
Specific design procedures for the Civil Design Checking practice are as defined in GF: A 357 01
2.Definition of (asks and supervision of personnel assigned to the team, including checking of drawings produced. Pinal checking of drawings shall be by the Lead Discipline Engineer.
3.Coordination with Engineers from other Disciplines for the inter-disciplinary tasks stated in Protocol General Section 1.3 and in GENERAL WORKING PROCEDURE
4.Assisting in the planning and implementation of the Project to meet schedule and budget requirements
5.Assisting in the management, maintenance and control of documents and data required for the good execution of the work. Document Control procedures are as defined inGENERAL WORKING PROCEDURE
6.Participate in coordination meetings (both internally and with clients and vendors)
7.Providing Civil Engineering support to site engineers on technical query issues
8.Coordination with client engineers on Static Equipment engineering issues
9.Providing support in the Static Equipment area for procurement activities
10.Assisting in the preparation of project proposals and pre-qualification documents in what relates to Static Equipment engineering design (preparation of calculations notes, specifications, data sheets, reports, material requisitions, budget man-hours, etc,)
11.Contributing towards, maintaining and implementing both company, and client HSE Management System objectives and procedures, as specified in GENERAL WORKING PROCEDURE and the HSE Manual 1357 A -HS EM – 2
12.Assisting in Software Spread sheet development for authorized engineering calculations.
13.Complying with the applicable company procedures for the Engineering Department and the Civil Discipline as they are documented in DEPARTMENT WORKING PROCEDURErespectively, as well as those procedures in the references listed therein.
Operational Duties:
Discipline Engineer on Projects. Functions are as per project scope and as assigned by the Lead Discipline Engineer and Project Manager / Project Engineer.
As QMR, whenever assigned, responsible to ensure that the TPME quality system is understood by Discipline members, and that the Quality Management System is implemented.
As HSE Representative, whenever assigned, responsible to ensure that the TPME HSE Management system is understood and implemented by Discipline members.
Educational Requirements:
BSc Degree in Civil/Structure Engineering
Master’s Degree an asset
Experience Requirement:
Total of 5 to 10 years experience
Specific Experience Areas:
5 years in Detailed design of Civil works for Oil/Gas/Petrochemical facilities
2 years in construction supervision exposure an asset.
Computer Skills:
Candidate should possess basic knowledge of: MS Office,SACS(an asset),SAP Series(an asset)
Candidate should have advanced skills in: STAAD III
Languages:
English
Personal:
In addition, the candidate to this positon must demonstrate:
Level of Creativity/Initiative-Good
Communication Skills-Good
Analytical Skills-Very Good
Leadership Skills-Good
APPLY
SENIOR PROCESS ENGINEER
Job posting reference 03414
Region Qatar
Location Doha
Contract type Temporary
Start date Immediate
Job description
SR.Process Engineer
Reporting lines and interactions:
Functionally reports to: Head of Process Discipline
Operationally reports to: Lead Discipline Engineer
Directly supervises:
Key interactions (internally, externally):
Job scope (budget, management, specific criteria):
The Process Engineer is responsible for executing delegated responsibilities within a project team to the effect of assisting the Senior or Lead Process Engineer in ensuring that all design and drafting output for the Discipline is carried out on schedule, within budget and to the complete satisfaction of the Client. He reports functionally to the Senior Discipline Engineer and operationally to the Lead Discipline Engineer.
1.Preparation of conceptual study reports and process design dossiers.
2.Assisting the Lead Discipline Engineer in overseeing all the issues pertaining to the completion of Process deliverables on a project, including the planning and implementation of the Project to meet schedule and budget requirements.
3.Conceptualization of the Process, preparation of the required study and philosophy reports and submitting them to client for approval; Discussing with the client and finalize the Basis of Design for the project.
4.Definition of tasks and supervision of Draftsmen assigned to the team, including checking of drawings produced. Final checking of drawings shall be by the Lead Discipline Engineer.
5.Performing simulations and preparing heat and material balance to meet the project specifications;
6.Preparation of Study Reports, Equipment datasheets, Instrument datasheets, Process Fluid Lists, PEFDs, Utility balance summary etc; Achieving the optimum design with respect to cost, safety and operability
7.Preparation of Process Flow Diagrams
8.Checking of the documents (e.g. Study Reports, Equipment datasheets, PFDs etc.) prepared by Discipline Engineers
9.Carrying out hydraulic calculations, instrument and equipment sizing calculations etc and preparation of specification sheets.
10.Developing P&ID, PSFS, and other relevant documents as required by project. Specific design procedures for the Process Design Checking practice are as defined in GE A312-02
11.Coordinating with Engineers from other Disciplines for the inter-disciplinary tasks stated in Protocol General Section 1.3 and in GENERAL WORKING PROCEDURE.
12.Coordinating with Project and client, subcontractors and/or suppliers; Coordinating with client engineers on Process engineering issues
13.Providing Process support to site engineers on technical query issues
14.Assisting in the preparation of project proposals and pre-qualification documents in what relates to Process engineering design (preparation of calculations notes, specifications, data sheets, reports, material requisitions, estimation of man-hours, method statement etc.)
15.Assisting in the management, maintenance and control of documents and data required for the good execution of the work. Document Control procedures are as defined in GENERAL WORKING PROCEDURE.
16. Following company Quality Management System as stated in the TPME Quality Manual and its subsequent procedures
17.Contributing towards, maintaining and implementing both company and client HSE Management System objectives and procedures, as specified in GENERAL WORKING PROCEDURE and the HSE Manual 1357 A - HSEM – 2
18.Complying with the applicable company procedures for the Engineering Department and the Process Discipline as they are documented in DEPARTMENT WORKING PROCEDURE respectively, as well as those procedures in the references listed therein.
19.Discipline Engineer on Projects. Functions are as per project scope and as assigned by the Lead Discipline Engineer
20.As QMR, whenever assigned, responsible to ensure that the TPME quality system is understood by Discipline members and that the Quality Management System is implemented.
21. As HSE Representative, whenever assigned, responsible to ensure that the TPME HSE Management system is understood and implemented by Discipline members.
Additional information:
Educational Degrees and Certifications
University or Higher Education:
Bachelor's Degree in Chemical Engineering
Computer Skills
Basic knowledge of:
- Simulation software such as: PROSIM, PRO II, OLGA, FLARENET
- MS Office
- Advanced knowledge of: HYSIS, PIPESIM
Experience
Minimum Time of Related Experience: 10 Years
- Oil and Gas Process Engineering Offshore / Onshore
- Familiarity with International Design Codes,
- Process Deliverables like P&ID's, Data Sheets,
- Experience in issuing Study Reports.
APPLY
Region Qatar
Location Doha
Contract type Temporary
Start date Immediate
Job description
SR.Process Engineer
Reporting lines and interactions:
Functionally reports to: Head of Process Discipline
Operationally reports to: Lead Discipline Engineer
Directly supervises:
Key interactions (internally, externally):
Job scope (budget, management, specific criteria):
The Process Engineer is responsible for executing delegated responsibilities within a project team to the effect of assisting the Senior or Lead Process Engineer in ensuring that all design and drafting output for the Discipline is carried out on schedule, within budget and to the complete satisfaction of the Client. He reports functionally to the Senior Discipline Engineer and operationally to the Lead Discipline Engineer.
1.Preparation of conceptual study reports and process design dossiers.
2.Assisting the Lead Discipline Engineer in overseeing all the issues pertaining to the completion of Process deliverables on a project, including the planning and implementation of the Project to meet schedule and budget requirements.
3.Conceptualization of the Process, preparation of the required study and philosophy reports and submitting them to client for approval; Discussing with the client and finalize the Basis of Design for the project.
4.Definition of tasks and supervision of Draftsmen assigned to the team, including checking of drawings produced. Final checking of drawings shall be by the Lead Discipline Engineer.
5.Performing simulations and preparing heat and material balance to meet the project specifications;
6.Preparation of Study Reports, Equipment datasheets, Instrument datasheets, Process Fluid Lists, PEFDs, Utility balance summary etc; Achieving the optimum design with respect to cost, safety and operability
7.Preparation of Process Flow Diagrams
8.Checking of the documents (e.g. Study Reports, Equipment datasheets, PFDs etc.) prepared by Discipline Engineers
9.Carrying out hydraulic calculations, instrument and equipment sizing calculations etc and preparation of specification sheets.
10.Developing P&ID, PSFS, and other relevant documents as required by project. Specific design procedures for the Process Design Checking practice are as defined in GE A312-02
11.Coordinating with Engineers from other Disciplines for the inter-disciplinary tasks stated in Protocol General Section 1.3 and in GENERAL WORKING PROCEDURE.
12.Coordinating with Project and client, subcontractors and/or suppliers; Coordinating with client engineers on Process engineering issues
13.Providing Process support to site engineers on technical query issues
14.Assisting in the preparation of project proposals and pre-qualification documents in what relates to Process engineering design (preparation of calculations notes, specifications, data sheets, reports, material requisitions, estimation of man-hours, method statement etc.)
15.Assisting in the management, maintenance and control of documents and data required for the good execution of the work. Document Control procedures are as defined in GENERAL WORKING PROCEDURE.
16. Following company Quality Management System as stated in the TPME Quality Manual and its subsequent procedures
17.Contributing towards, maintaining and implementing both company and client HSE Management System objectives and procedures, as specified in GENERAL WORKING PROCEDURE and the HSE Manual 1357 A - HSEM – 2
18.Complying with the applicable company procedures for the Engineering Department and the Process Discipline as they are documented in DEPARTMENT WORKING PROCEDURE respectively, as well as those procedures in the references listed therein.
19.Discipline Engineer on Projects. Functions are as per project scope and as assigned by the Lead Discipline Engineer
20.As QMR, whenever assigned, responsible to ensure that the TPME quality system is understood by Discipline members and that the Quality Management System is implemented.
21. As HSE Representative, whenever assigned, responsible to ensure that the TPME HSE Management system is understood and implemented by Discipline members.
Additional information:
Educational Degrees and Certifications
University or Higher Education:
Bachelor's Degree in Chemical Engineering
Computer Skills
Basic knowledge of:
- Simulation software such as: PROSIM, PRO II, OLGA, FLARENET
- MS Office
- Advanced knowledge of: HYSIS, PIPESIM
Experience
Minimum Time of Related Experience: 10 Years
- Oil and Gas Process Engineering Offshore / Onshore
- Familiarity with International Design Codes,
- Process Deliverables like P&ID's, Data Sheets,
- Experience in issuing Study Reports.
APPLY
SENIOR PLANNING ENGINEER
Job posting reference 03364
Region Qatar
Location Doha
Contract type Permanent
Start date 23/05/11
Job description
Reporting lines and interactions:
Functionally reports to: Planning Division Manger
Operationally reports to: Project Manager; Project Control Manager or Lead Planning Engineer
Directly supervises:
Key interactions (internally, externally):
Job scope (budget, management, specific criteria):
The Senior Planning Engineer is in charge of rendering Planning, Scheduling and Monitoring services effectively and as per Technip Planning Procedures and contract requirements. He is responsible for highlighting areas of concerns and solutions to help achieve a successful and timely completion of Projects. He follows up closely with vendors and subcontractors on the execution of project Procurement and Manufacturing schedules, maintaining close liaisons with Technip's Procurement Division and Inspection Unit at all times for proper follow-up.
1. For assigned projects, the Planning Engineer is in charge of setting up:
- Project Calendar
- Planning Procedures
- Progress Measurement procedures
- Reporting procedures
- Work Breakdown Structure (WBS)
- OBS
He is in charge of creating the 2 key schedules per project phase:
- Procurement Schedule: from Material Requisition till Purchase Order Placement
- Manufacturing Schedule: from Purchase Order Placement till Material receipt
2. Discusses the outcome of the above planning in terms of schedules and procedures with the Project Manager and / or Lead Discipline Engineers in order to achieve a final project plan.
3. Regularly reviews the manpower plan to check compliance with Contract Terms & Conditions;
4. Incorporates team comments and issues final schedule to Client for approval; Holds discussions with Client representatives over the schedule and incorporates comments into the schedule; Issues the final Implementation Plan.
5. Participates in the negotiations on project control aspects with Vendors and Contractors; Reviews and comment on Contractors' and Vendors' schedules; Issues revised schedules including corrective actions.
6. Prepares progress measurement procedures for all phases of the project including determination of weight factors.
7. Collects and compiles back-up data for project statistics and ratio calculations.
8. Undertakes project follow-up of progress monitoring, working to update the project schedule with actual input and activity progress; Issues the updated schedule status along with the trend analysis schedule showing forecast dates for group information purposes.
9. Provides assistance to the Project Manager on project delays, reasons and corrective action suggestions
10. Sets up and issues the Document Register; Prepares Level 3 List and Document Register using JANUS or MS Access.
11. Prepares Planning attachments for Weekly Progress Reports; Issues feedback to Project Managers for onward transmission to client;
12. Prepares and issues Planning attachments for Monthly Progress Reports. These include:
- Updated Project schedule
- Updated Document register
- Progress Statistics
- Progress S - curves covering all phases of the project
- Manpower Histograms
- Milestones Status Report
- Exceptional reports such as " Activity Behind Schedule" or the "Activity Due Plan" for the following week or month.
13. Prepares a detailed network using project management software (such as MS Project or Primavera); Ensures the update and maintenance of Planning software applications
14. Reviews and comments on vendor schedules, as well as progress reports for various purchase orders; Monitors timely execution of such orders closely; Informs the Project Manager in case of delay and suggests corrective actions.
15. When assigned a Lead Planning Engineer position, takes charge of preparing the Engineering Document Register and the Procurement Document Register inclusive of all basic overall schedules (Levels 0,1 and 2) as well as Detailed Schedules (Level 3).
16. Reviews Construction contractors' schedules and Progress Reports, provides comments and suggests corrective action.
17. Contributes towards implementing both company and client HSE Management System objectives and procedures.
18. Complies with corporate Quality standards as stipulated in the Quality Manual and its ensuing procedures
19. Complies with the applicable company procedures for this Division as they are documented in the relevant DWP documentation.
Additional information :
Educational Degrees and Certifications
University or Higher Education: Engineering Degree or Equivalent
Computer Skills MS Project, Primavera, MS Access, MS Office
Experience
Minimum Time of Related Experience: 10 years
- At least 3 years in a managerial role.
- More than 5 yeas in a direct planning function for a construction or engineering firm of significance
- Must have worked on at least 1 to 2 EPC (LSTK) contracts
- OFFSHORE experience is a MUST.
APPLY
Region Qatar
Location Doha
Contract type Permanent
Start date 23/05/11
Job description
Reporting lines and interactions:
Functionally reports to: Planning Division Manger
Operationally reports to: Project Manager; Project Control Manager or Lead Planning Engineer
Directly supervises:
Key interactions (internally, externally):
Job scope (budget, management, specific criteria):
The Senior Planning Engineer is in charge of rendering Planning, Scheduling and Monitoring services effectively and as per Technip Planning Procedures and contract requirements. He is responsible for highlighting areas of concerns and solutions to help achieve a successful and timely completion of Projects. He follows up closely with vendors and subcontractors on the execution of project Procurement and Manufacturing schedules, maintaining close liaisons with Technip's Procurement Division and Inspection Unit at all times for proper follow-up.
1. For assigned projects, the Planning Engineer is in charge of setting up:
- Project Calendar
- Planning Procedures
- Progress Measurement procedures
- Reporting procedures
- Work Breakdown Structure (WBS)
- OBS
He is in charge of creating the 2 key schedules per project phase:
- Procurement Schedule: from Material Requisition till Purchase Order Placement
- Manufacturing Schedule: from Purchase Order Placement till Material receipt
2. Discusses the outcome of the above planning in terms of schedules and procedures with the Project Manager and / or Lead Discipline Engineers in order to achieve a final project plan.
3. Regularly reviews the manpower plan to check compliance with Contract Terms & Conditions;
4. Incorporates team comments and issues final schedule to Client for approval; Holds discussions with Client representatives over the schedule and incorporates comments into the schedule; Issues the final Implementation Plan.
5. Participates in the negotiations on project control aspects with Vendors and Contractors; Reviews and comment on Contractors' and Vendors' schedules; Issues revised schedules including corrective actions.
6. Prepares progress measurement procedures for all phases of the project including determination of weight factors.
7. Collects and compiles back-up data for project statistics and ratio calculations.
8. Undertakes project follow-up of progress monitoring, working to update the project schedule with actual input and activity progress; Issues the updated schedule status along with the trend analysis schedule showing forecast dates for group information purposes.
9. Provides assistance to the Project Manager on project delays, reasons and corrective action suggestions
10. Sets up and issues the Document Register; Prepares Level 3 List and Document Register using JANUS or MS Access.
11. Prepares Planning attachments for Weekly Progress Reports; Issues feedback to Project Managers for onward transmission to client;
12. Prepares and issues Planning attachments for Monthly Progress Reports. These include:
- Updated Project schedule
- Updated Document register
- Progress Statistics
- Progress S - curves covering all phases of the project
- Manpower Histograms
- Milestones Status Report
- Exceptional reports such as " Activity Behind Schedule" or the "Activity Due Plan" for the following week or month.
13. Prepares a detailed network using project management software (such as MS Project or Primavera); Ensures the update and maintenance of Planning software applications
14. Reviews and comments on vendor schedules, as well as progress reports for various purchase orders; Monitors timely execution of such orders closely; Informs the Project Manager in case of delay and suggests corrective actions.
15. When assigned a Lead Planning Engineer position, takes charge of preparing the Engineering Document Register and the Procurement Document Register inclusive of all basic overall schedules (Levels 0,1 and 2) as well as Detailed Schedules (Level 3).
16. Reviews Construction contractors' schedules and Progress Reports, provides comments and suggests corrective action.
17. Contributes towards implementing both company and client HSE Management System objectives and procedures.
18. Complies with corporate Quality standards as stipulated in the Quality Manual and its ensuing procedures
19. Complies with the applicable company procedures for this Division as they are documented in the relevant DWP documentation.
Additional information :
Educational Degrees and Certifications
University or Higher Education: Engineering Degree or Equivalent
Computer Skills MS Project, Primavera, MS Access, MS Office
Experience
Minimum Time of Related Experience: 10 years
- At least 3 years in a managerial role.
- More than 5 yeas in a direct planning function for a construction or engineering firm of significance
- Must have worked on at least 1 to 2 EPC (LSTK) contracts
- OFFSHORE experience is a MUST.
APPLY
JUNIOR INSTRUMENTATION ENGINEER
Job posting reference 03362
Region Qatar
Location Doha
Contract type Permanent
Start date 23/05/11
Job description
Job scope (budget, management, specific criteria):
The Instrumentation and Control Engineer is primarily engaged in the design, modeling, and analysis of I & C engineering requirements on a project, tender or proposal, as per client standards, TP standards, and project scope of work. He reports functionally to the Head of Discipline and operationally to one or more Project / Engineering Managers.
Be it in the context of preparation for a tender / proposal or involvement in a project, the key responsibilities of the Junior Engineer are:
1. Planning and executing Instrumentation engineering design for field instrumentation, Distributed Control System (DCS), Supervisory control and Data Acquisition (SCADA), Integrated Control System (ICS), Fire and Gas, Safety Instrumented Systems (SIS) and Telecommunications systems. This entails the preparation of basic design , FEED and detailed design of the instrumentation and controls part of the project, such as:
Control & Operations Philosophy
Schedule and Cost Estimates
Approved Vendor List
EPIC Scope of Work, Schedule and Cost Estimates
Basis of Design document
Architecture Diagrams
Functional Specifications
Telecommunication System
Technical Bid Evaluations
Review of instrumentation drawings
Construction Scope of Work
Review of drawings from other Disciplines. Design review procedures are as per General Working Procedure.
Specific design procedures for the Instrumentation & Control Design Checking practice are as defined in GE A3 92-01
2. Ensuring that the design is carried out as per the industry standard practices and in performance with the quality management system of TPME.
3. Document Control: This entails the development / update of the Document Register with accurate progress information on a regular basis. Each Lead Discipline Engineer is responsible for the discipline filing system for the project. He / she selects useful documentation and data at the end of the project and includes these in the Department
main filing system. Document Control procedures are defined in General Working Procedure.
4. Co-ordination with Project and client, subcontractors and/or suppliers
5. Providing technical support to site engineers on technical query issues
6. Coordination with client engineers on Instrumentation engineering issues
7. Providing support in the Instrumentation area for procurement activities
8. Assisting in the preparation of project proposals and pre-qualification documents in what relates to Instrumentation engineering design.
9. Identification of issues that impede project progress and reporting to Project Managers and Discipline Heads
10. Contributing towards, maintaining and implementing both company and client HSE Management System objectives and procedures, as specified in General Working Procedure and the HSE Manual.
11. Providing site engineering support, as well as other inter-disciplinary support should the requirement arise (e.g. Inspection or Procurement technical support).
12. Assimilating the evolution of new products and technology, and updating oneself on the latest international standards in terms of engineering design practices and their applications;
13. Identifying new methodology of work process required for higher productivity.
14. Complying with the applicable company procedures for the Engineering Department and the Instrumentation and Control Discipline as they are documented in Department Working Procedure respectively, as well as those procedures in the references listed therein.
Additional information :
Educational Degrees and Certifications
University or Higher Education: BSc. in Engineering, Technology or equivalent
Computer Skills Basic Knowledge Of: In-Tools, CAD, Planning,
Advanced Knowledge Of: Ms Excel, Ms Access, Ms Word, Ms PowerPoint,
Lotus Notes, sizing Software for CV, PSV, Orifice
Experience:
Minimum Time of Related Experience:
8+ Years
- 1 year in a managerial function
- 8 years in Oil & Gas/Refinery/ Petrochemical Industry (Offshore & Onshore Project)
- 3 years in Control Systems (DCS / F&G / ESD / SCADA / WCP / Compressor Control)
- 7 years in field Instrumentation
- Exposure to Telecommunications
- 6 months in Construction Supervision / Commissioning
- Should have been in a position of Lead Engineer for a period of at least 1 year in an established project set-up.
APPLY
Region Qatar
Location Doha
Contract type Permanent
Start date 23/05/11
Job description
Job scope (budget, management, specific criteria):
The Instrumentation and Control Engineer is primarily engaged in the design, modeling, and analysis of I & C engineering requirements on a project, tender or proposal, as per client standards, TP standards, and project scope of work. He reports functionally to the Head of Discipline and operationally to one or more Project / Engineering Managers.
Be it in the context of preparation for a tender / proposal or involvement in a project, the key responsibilities of the Junior Engineer are:
1. Planning and executing Instrumentation engineering design for field instrumentation, Distributed Control System (DCS), Supervisory control and Data Acquisition (SCADA), Integrated Control System (ICS), Fire and Gas, Safety Instrumented Systems (SIS) and Telecommunications systems. This entails the preparation of basic design , FEED and detailed design of the instrumentation and controls part of the project, such as:
Control & Operations Philosophy
Schedule and Cost Estimates
Approved Vendor List
EPIC Scope of Work, Schedule and Cost Estimates
Basis of Design document
Architecture Diagrams
Functional Specifications
Telecommunication System
Technical Bid Evaluations
Review of instrumentation drawings
Construction Scope of Work
Review of drawings from other Disciplines. Design review procedures are as per General Working Procedure.
Specific design procedures for the Instrumentation & Control Design Checking practice are as defined in GE A3 92-01
2. Ensuring that the design is carried out as per the industry standard practices and in performance with the quality management system of TPME.
3. Document Control: This entails the development / update of the Document Register with accurate progress information on a regular basis. Each Lead Discipline Engineer is responsible for the discipline filing system for the project. He / she selects useful documentation and data at the end of the project and includes these in the Department
main filing system. Document Control procedures are defined in General Working Procedure.
4. Co-ordination with Project and client, subcontractors and/or suppliers
5. Providing technical support to site engineers on technical query issues
6. Coordination with client engineers on Instrumentation engineering issues
7. Providing support in the Instrumentation area for procurement activities
8. Assisting in the preparation of project proposals and pre-qualification documents in what relates to Instrumentation engineering design.
9. Identification of issues that impede project progress and reporting to Project Managers and Discipline Heads
10. Contributing towards, maintaining and implementing both company and client HSE Management System objectives and procedures, as specified in General Working Procedure and the HSE Manual.
11. Providing site engineering support, as well as other inter-disciplinary support should the requirement arise (e.g. Inspection or Procurement technical support).
12. Assimilating the evolution of new products and technology, and updating oneself on the latest international standards in terms of engineering design practices and their applications;
13. Identifying new methodology of work process required for higher productivity.
14. Complying with the applicable company procedures for the Engineering Department and the Instrumentation and Control Discipline as they are documented in Department Working Procedure respectively, as well as those procedures in the references listed therein.
Additional information :
Educational Degrees and Certifications
University or Higher Education: BSc. in Engineering, Technology or equivalent
Computer Skills Basic Knowledge Of: In-Tools, CAD, Planning,
Advanced Knowledge Of: Ms Excel, Ms Access, Ms Word, Ms PowerPoint,
Lotus Notes, sizing Software for CV, PSV, Orifice
Experience:
Minimum Time of Related Experience:
8+ Years
- 1 year in a managerial function
- 8 years in Oil & Gas/Refinery/ Petrochemical Industry (Offshore & Onshore Project)
- 3 years in Control Systems (DCS / F&G / ESD / SCADA / WCP / Compressor Control)
- 7 years in field Instrumentation
- Exposure to Telecommunications
- 6 months in Construction Supervision / Commissioning
- Should have been in a position of Lead Engineer for a period of at least 1 year in an established project set-up.
APPLY
ELECTRICAL DESIGNER
Job posting reference 03385
Region Qatar
Location Doha
Contract type Temporary
Start date Immediate
Job description
ELECTRICAL DESIGNER
Purpose and Scope
The Electrical Designer is mainly concerned with the preparation of design deliverables for projects, tenders or
proposals based on Engineers' plans and according to quality standards and client requirements.
Key Responsibilities
1. Organization and co-ordination of design or drafting duties. Output includes:
Primary Single Line Diagrams
Preliminary Equipment Layout
Typical Layouts
Preliminary Cable Routing
Typical Installation Details
Preliminary Material Take-off
Substation Single Line Diagram
Substation Arrangement
Equipment / Earthing / Lighting layouts
Detailed cable / tray routing
Cable schedules
Installation Details
Detailed Material Take-Off
As-Built Documentation
2. Development of drawings, models and documents listed above using CAD systems, as required for the Project or Proposal.
3. Revision of other discipline drawings/documents for IDC when required and as per inter-disciplinary tasks stated in Protocol General Section 1.3 and in GENERAL WORKING PROCEDURE; Checking back-drafted drawings for compliance with QA standards and procedures when required;
4. Completion of deliverables on schedule and within the hours allocated.
5. Providing feedback to Lead Engineers on client/site/vendor queries
6. Planning drawing deliverables in line with schedule requirements
7. Providing technical support to draftsmen.
8. Contributing towards, maintaining and implementing both company and client HSE Management System objectives and procedures, as specified in GENERAL WORKING PROCEDURE and the HSE Manual 1357 A -HSEM – 2
9. Complying with the applicable company procedures for the Engineering Department and the Electrical Discipline as they are documented in DEPARTMENT WORKING PROCEDURE respectively, as well as those procedures in the references listed therein.
Operational Duties:
The Designer reports functionally to the Discipline Engineers and Senior Designers and operationally to an assigned Engineer or Lead Engineer depending on project size and scope.
As QMR, whenever assigned, responsible to ensure that the TPME quality system is understood by Discipline members and that the Quality Management System is implemented.
As HSE Representative, whenever assigned, responsible to ensure that the TPME HSE Management system is understood and implemented by Discipline members.
Educational requirements:
HND Equivalent in Electrical Engineering or, Diploma in Electrical Engineering
Experience Requirement:
Total of 5 years of experience
Specific Experience Areas:
3years in Oil & Gas, onshore / offshore
2-3 years in Power Generation / Petrochemical / Other Industrial
Computer Skills:
Candidate should possess basic knowledge of: PDS
Candidate should have advanced skills in: AutoCAD or Microstation
Languages:
English
Personal:
In addition, the candidate to this position must demonstrate:
Level of Creativity/Initiative-Very Good
Communication Skills-Good
Analytical Skills-Very Good
Leadership Skills-Good
APPLY
Region Qatar
Location Doha
Contract type Temporary
Start date Immediate
Job description
ELECTRICAL DESIGNER
Purpose and Scope
The Electrical Designer is mainly concerned with the preparation of design deliverables for projects, tenders or
proposals based on Engineers' plans and according to quality standards and client requirements.
Key Responsibilities
1. Organization and co-ordination of design or drafting duties. Output includes:
Primary Single Line Diagrams
Preliminary Equipment Layout
Typical Layouts
Preliminary Cable Routing
Typical Installation Details
Preliminary Material Take-off
Substation Single Line Diagram
Substation Arrangement
Equipment / Earthing / Lighting layouts
Detailed cable / tray routing
Cable schedules
Installation Details
Detailed Material Take-Off
As-Built Documentation
2. Development of drawings, models and documents listed above using CAD systems, as required for the Project or Proposal.
3. Revision of other discipline drawings/documents for IDC when required and as per inter-disciplinary tasks stated in Protocol General Section 1.3 and in GENERAL WORKING PROCEDURE; Checking back-drafted drawings for compliance with QA standards and procedures when required;
4. Completion of deliverables on schedule and within the hours allocated.
5. Providing feedback to Lead Engineers on client/site/vendor queries
6. Planning drawing deliverables in line with schedule requirements
7. Providing technical support to draftsmen.
8. Contributing towards, maintaining and implementing both company and client HSE Management System objectives and procedures, as specified in GENERAL WORKING PROCEDURE and the HSE Manual 1357 A -HSEM – 2
9. Complying with the applicable company procedures for the Engineering Department and the Electrical Discipline as they are documented in DEPARTMENT WORKING PROCEDURE respectively, as well as those procedures in the references listed therein.
Operational Duties:
The Designer reports functionally to the Discipline Engineers and Senior Designers and operationally to an assigned Engineer or Lead Engineer depending on project size and scope.
As QMR, whenever assigned, responsible to ensure that the TPME quality system is understood by Discipline members and that the Quality Management System is implemented.
As HSE Representative, whenever assigned, responsible to ensure that the TPME HSE Management system is understood and implemented by Discipline members.
Educational requirements:
HND Equivalent in Electrical Engineering or, Diploma in Electrical Engineering
Experience Requirement:
Total of 5 years of experience
Specific Experience Areas:
3years in Oil & Gas, onshore / offshore
2-3 years in Power Generation / Petrochemical / Other Industrial
Computer Skills:
Candidate should possess basic knowledge of: PDS
Candidate should have advanced skills in: AutoCAD or Microstation
Languages:
English
Personal:
In addition, the candidate to this position must demonstrate:
Level of Creativity/Initiative-Very Good
Communication Skills-Good
Analytical Skills-Very Good
Leadership Skills-Good
APPLY
ELECTRICAL ENGINEER
Job posting reference 03376
Region Qatar
Location Doha
Contract type Permanent
Start date Immediate
Job description
ELECTRICAL ENGINEER
Purpose and Scope
The Electrical Engineer is primarily responsible to ensure the preparation of basic and detailed engineering design, modeling and analysis of engineering requirements for a given project, and to liaise with the client, the project team, vendors and site establishment to ensure conformity of electrical engineering activities with the overall project plan, client requirements, and the company Quality Policy.
Key Responsibilities
1.Executing electrical engineering design for power, earthing and lighting of industrial and commercial facilities as instructed by Lead Electrical Engineers or Project Engineers / Managers. This entails:
Preparation of basic design, FEED and detailed design of the electrical part of the project. Specific design procedures for the Electrical Design Checking practice are as defined in GE A346-01
Preparation of electrical load list and equipment list
Preparation of single line diagrams, for designer / draughtsman to draw, and monitoring progress at drawing / drafting execution level
Preparation of Specifications / Datasheets of electrical equipment's
Preparation of requisitions for electrical equipment's
Review of bids and preparation of TBE and TBT
Review and commenting on vendor drawings and documents,
Review of drawings from other Disciplines. Design review procedures are as per GENERAL WORKING PROCEDURE. Specific design procedures for the Electrical Design Checking practice are as defined in GE A346-01.
2.Definition of tasks and supervision of personnel such as Designers and Draftsmen assigned to the team, including checking of drawings produced. Final checking of drawings shall be by the Lead Discipline Engineer.
3.Coordination with Engineers from other Disciplines for the inter-disciplinary tasks stated in Protocol General Section 1.3 and in GENERAL WORKING PROCEDURE.
4.Assisting in the planning and implementation of die Project to meet schedule and budget requirements.
5.Assisting in the management, maintenance and control of documents and data required for the good execution of the work. Document Control procedures are as defined in GENERAL WORKING PROCEDURE.
6.Co-ordination with Project and client, subcontractors and/or suppliers.
7.Providing electrical support to site engineers on technical query' issues
8.Coordination with client engineers on electrical engineering issues
9.Providing support in the electrical area for procurement activities
10.Assisting in the preparation of project proposals and pre-qualification documents in what relates to Electrical engineering design (preparation of calculations notes, specifications, data sheets, reports, material requisitions, etc, as defined by the Lead Discipline Engineer).
11.Contributing towards, maintaining and implementing both company and client HSE Management System objectives and procedures, as specified in GENERAL WORKING PROCEDURE A 302 -16 2 and the HSE Manual 1357 A -HSEM - 2
12.Complying with the applicable company procedures for the Engineering Department and the Electrical Discipline as they are documented in DEPARTMENT WORKING PROCEDURE respectively, as well as those procedures in the references listed therein.
Operational Duties:
Discipline Engineer on Projects. Functions are as per project scope and as assigned by the Lead Discipline Engineer and Project Manager /Project Engineer.
As QMR, whenever assigned, responsible to ensure that the TPME quality system is understood by Discipline members and that the Quality Management System is implemented.
As HSE Representative, whenever assigned, responsible to ensure that the TPME HSE Management system is understood and implemented by Discipline members.
Educational Requirements:
BSc in Electrical Engineering with Electrical Power Background
Experience Requirement:
Total of 5 years experience
Specific Experience Areas:
2 to 3 years Engineer in Oil&Gas/Petrochemical environment
1 to 2 years Experience in the Power Generation/transmission field
4 to 5 years experience in Power Distribution.
Proven experience in:
Consistent experience in the preparation of specifications/datasheets/calculation notes and single line diagrams in an Oil&Gas environment
Computer Skills:
Candidate should posses basic knowledge of:MS Office
Languages:
English
Personal:
In addition, the candidate to this position must demonstrate:
Level of Creativity/Initiative-Very Good
Communication Skills- Very Good
Analytical Skills- Very Good
Leadership Skills-Good
APPLY
Region Qatar
Location Doha
Contract type Permanent
Start date Immediate
Job description
ELECTRICAL ENGINEER
Purpose and Scope
The Electrical Engineer is primarily responsible to ensure the preparation of basic and detailed engineering design, modeling and analysis of engineering requirements for a given project, and to liaise with the client, the project team, vendors and site establishment to ensure conformity of electrical engineering activities with the overall project plan, client requirements, and the company Quality Policy.
Key Responsibilities
1.Executing electrical engineering design for power, earthing and lighting of industrial and commercial facilities as instructed by Lead Electrical Engineers or Project Engineers / Managers. This entails:
Preparation of basic design, FEED and detailed design of the electrical part of the project. Specific design procedures for the Electrical Design Checking practice are as defined in GE A346-01
Preparation of electrical load list and equipment list
Preparation of single line diagrams, for designer / draughtsman to draw, and monitoring progress at drawing / drafting execution level
Preparation of Specifications / Datasheets of electrical equipment's
Preparation of requisitions for electrical equipment's
Review of bids and preparation of TBE and TBT
Review and commenting on vendor drawings and documents,
Review of drawings from other Disciplines. Design review procedures are as per GENERAL WORKING PROCEDURE. Specific design procedures for the Electrical Design Checking practice are as defined in GE A346-01.
2.Definition of tasks and supervision of personnel such as Designers and Draftsmen assigned to the team, including checking of drawings produced. Final checking of drawings shall be by the Lead Discipline Engineer.
3.Coordination with Engineers from other Disciplines for the inter-disciplinary tasks stated in Protocol General Section 1.3 and in GENERAL WORKING PROCEDURE.
4.Assisting in the planning and implementation of die Project to meet schedule and budget requirements.
5.Assisting in the management, maintenance and control of documents and data required for the good execution of the work. Document Control procedures are as defined in GENERAL WORKING PROCEDURE.
6.Co-ordination with Project and client, subcontractors and/or suppliers.
7.Providing electrical support to site engineers on technical query' issues
8.Coordination with client engineers on electrical engineering issues
9.Providing support in the electrical area for procurement activities
10.Assisting in the preparation of project proposals and pre-qualification documents in what relates to Electrical engineering design (preparation of calculations notes, specifications, data sheets, reports, material requisitions, etc, as defined by the Lead Discipline Engineer).
11.Contributing towards, maintaining and implementing both company and client HSE Management System objectives and procedures, as specified in GENERAL WORKING PROCEDURE A 302 -16 2 and the HSE Manual 1357 A -HSEM - 2
12.Complying with the applicable company procedures for the Engineering Department and the Electrical Discipline as they are documented in DEPARTMENT WORKING PROCEDURE respectively, as well as those procedures in the references listed therein.
Operational Duties:
Discipline Engineer on Projects. Functions are as per project scope and as assigned by the Lead Discipline Engineer and Project Manager /Project Engineer.
As QMR, whenever assigned, responsible to ensure that the TPME quality system is understood by Discipline members and that the Quality Management System is implemented.
As HSE Representative, whenever assigned, responsible to ensure that the TPME HSE Management system is understood and implemented by Discipline members.
Educational Requirements:
BSc in Electrical Engineering with Electrical Power Background
Experience Requirement:
Total of 5 years experience
Specific Experience Areas:
2 to 3 years Engineer in Oil&Gas/Petrochemical environment
1 to 2 years Experience in the Power Generation/transmission field
4 to 5 years experience in Power Distribution.
Proven experience in:
Consistent experience in the preparation of specifications/datasheets/calculation notes and single line diagrams in an Oil&Gas environment
Computer Skills:
Candidate should posses basic knowledge of:MS Office
Languages:
English
Personal:
In addition, the candidate to this position must demonstrate:
Level of Creativity/Initiative-Very Good
Communication Skills- Very Good
Analytical Skills- Very Good
Leadership Skills-Good
APPLY
ELECTRICAL ENGINEER
Job posting reference 03467
Region Qatar
Location Doha
Contract type Temporary
Start date Immediate
Job description
ELECTRICAL ENGINEER
Purpose and Scope
The Electrical Engineer is primarily responsible to ensure the preparation of basic and detailed engineering design, modeling and analysis of engineering requirements for a given project, and to liaise with the client, the project team, vendors and site establishment to ensure conformity of electrical engineering activities with the overall project plan, client requirements, and the company Quality Policy.
Key Responsibilities
1.Executing electrical engineering design for power, earthing and lighting of industrial and commercial facilities as instructed by Lead Electrical Engineers or Project Engineers / Managers. This entails:
Preparation of basic design, FEED and detailed design of the electrical part of the project. Specific design procedures for the Electrical Design Checking practice are as defined in GE A346-01
Preparation of electrical load list and equipment list
Preparation of single line diagrams, for designer / draughtsman to draw, and monitoring progress at drawing / drafting execution level
Preparation of Specifications / Datasheets of electrical equipment's
Preparation of requisitions for electrical equipment's
Review of bids and preparation of TBE and TBT
Review and commenting on vendor drawings and documents,
Review of drawings from other Disciplines. Design review procedures are as per GENERAL WORKING PROCEDURE. Specific design procedures for the Electrical Design Checking practice are as defined in GE A346-01.
2.Definition of tasks and supervision of personnel such as Designers and Draftsmen assigned to the team, including checking of drawings produced. Final checking of drawings shall be by the Lead Discipline Engineer.
3.Coordination with Engineers from other Disciplines for the inter-disciplinary tasks stated in Protocol General Section 1.3 and in GENERAL WORKING PROCEDURE.
4.Assisting in the planning and implementation of die Project to meet schedule and budget requirements.
5.Assisting in the management, maintenance and control of documents and data required for the good execution of the work. Document Control procedures are as defined in GENERAL WORKING PROCEDURE.
6.Co-ordination with Project and client, subcontractors and/or suppliers.
7.Providing electrical support to site engineers on technical query' issues
8.Coordination with client engineers on electrical engineering issues
9.Providing support in the electrical area for procurement activities
10.Assisting in the preparation of project proposals and pre-qualification documents in what relates to Electrical engineering design (preparation of calculations notes, specifications, data sheets, reports, material requisitions, etc, as defined by the Lead Discipline Engineer).
11.Contributing towards, maintaining and implementing both company and client HSE Management System objectives and procedures, as specified in GENERAL WORKING PROCEDURE A 302 -16 2 and the HSE Manual 1357 A -HSEM - 2
12.Complying with the applicable company procedures for the Engineering Department and the Electrical Discipline as they are documented in DEPARTMENT WORKING PROCEDURE respectively, as well as those procedures in the references listed therein.
Operational Duties:
Discipline Engineer on Projects. Functions are as per project scope and as assigned by the Lead Discipline Engineer and Project Manager /Project Engineer.
As QMR, whenever assigned, responsible to ensure that the TPME quality system is understood by Discipline members and that the Quality Management System is implemented.
As HSE Representative, whenever assigned, responsible to ensure that the TPME HSE Management system is understood and implemented by Discipline members.
Educational Requirements:
BSc in Electrical Engineering with Electrical Power Background
Experience Requirement:
Total of 5 years experience
Specific Experience Areas:
2 to 3 years Engineer in Oil&Gas/Petrochemical environment
1 to 2 years Experience in the Power Generation/transmission field
4 to 5 years experience in Power Distribution.
Proven experience in:
Consistent experience in the preparation of specifications/datasheets/calculation notes and single line diagrams in an Oil&Gas environment
Computer Skills:
Candidate should posses basic knowledge of:MS Office
Languages:
English
Personal:
In addition, the candidate to this position must demonstrate:
Level of Creativity/Initiative-Very Good
Communication Skills- Very Good
Analytical Skills- Very Good
Leadership Skills-Good
APPLY
Region Qatar
Location Doha
Contract type Temporary
Start date Immediate
Job description
ELECTRICAL ENGINEER
Purpose and Scope
The Electrical Engineer is primarily responsible to ensure the preparation of basic and detailed engineering design, modeling and analysis of engineering requirements for a given project, and to liaise with the client, the project team, vendors and site establishment to ensure conformity of electrical engineering activities with the overall project plan, client requirements, and the company Quality Policy.
Key Responsibilities
1.Executing electrical engineering design for power, earthing and lighting of industrial and commercial facilities as instructed by Lead Electrical Engineers or Project Engineers / Managers. This entails:
Preparation of basic design, FEED and detailed design of the electrical part of the project. Specific design procedures for the Electrical Design Checking practice are as defined in GE A346-01
Preparation of electrical load list and equipment list
Preparation of single line diagrams, for designer / draughtsman to draw, and monitoring progress at drawing / drafting execution level
Preparation of Specifications / Datasheets of electrical equipment's
Preparation of requisitions for electrical equipment's
Review of bids and preparation of TBE and TBT
Review and commenting on vendor drawings and documents,
Review of drawings from other Disciplines. Design review procedures are as per GENERAL WORKING PROCEDURE. Specific design procedures for the Electrical Design Checking practice are as defined in GE A346-01.
2.Definition of tasks and supervision of personnel such as Designers and Draftsmen assigned to the team, including checking of drawings produced. Final checking of drawings shall be by the Lead Discipline Engineer.
3.Coordination with Engineers from other Disciplines for the inter-disciplinary tasks stated in Protocol General Section 1.3 and in GENERAL WORKING PROCEDURE.
4.Assisting in the planning and implementation of die Project to meet schedule and budget requirements.
5.Assisting in the management, maintenance and control of documents and data required for the good execution of the work. Document Control procedures are as defined in GENERAL WORKING PROCEDURE.
6.Co-ordination with Project and client, subcontractors and/or suppliers.
7.Providing electrical support to site engineers on technical query' issues
8.Coordination with client engineers on electrical engineering issues
9.Providing support in the electrical area for procurement activities
10.Assisting in the preparation of project proposals and pre-qualification documents in what relates to Electrical engineering design (preparation of calculations notes, specifications, data sheets, reports, material requisitions, etc, as defined by the Lead Discipline Engineer).
11.Contributing towards, maintaining and implementing both company and client HSE Management System objectives and procedures, as specified in GENERAL WORKING PROCEDURE A 302 -16 2 and the HSE Manual 1357 A -HSEM - 2
12.Complying with the applicable company procedures for the Engineering Department and the Electrical Discipline as they are documented in DEPARTMENT WORKING PROCEDURE respectively, as well as those procedures in the references listed therein.
Operational Duties:
Discipline Engineer on Projects. Functions are as per project scope and as assigned by the Lead Discipline Engineer and Project Manager /Project Engineer.
As QMR, whenever assigned, responsible to ensure that the TPME quality system is understood by Discipline members and that the Quality Management System is implemented.
As HSE Representative, whenever assigned, responsible to ensure that the TPME HSE Management system is understood and implemented by Discipline members.
Educational Requirements:
BSc in Electrical Engineering with Electrical Power Background
Experience Requirement:
Total of 5 years experience
Specific Experience Areas:
2 to 3 years Engineer in Oil&Gas/Petrochemical environment
1 to 2 years Experience in the Power Generation/transmission field
4 to 5 years experience in Power Distribution.
Proven experience in:
Consistent experience in the preparation of specifications/datasheets/calculation notes and single line diagrams in an Oil&Gas environment
Computer Skills:
Candidate should posses basic knowledge of:MS Office
Languages:
English
Personal:
In addition, the candidate to this position must demonstrate:
Level of Creativity/Initiative-Very Good
Communication Skills- Very Good
Analytical Skills- Very Good
Leadership Skills-Good
APPLY
SENIOR ELECTRICAL ENGINEER
Job posting reference 03384
Region Qatar
Location Doha
Contract type Temporary
Start date Immediate
Job description
Senior Electrical Engineer
Purpose and Scope
The Senior Electrical Engineer is primarily engaged in the design, modeling, and analysis of Electrical Engineering requirements on a project, and occasionally the requisition and installation of Electrical Engineering equipment, as per client instructions, TPME standards and project scope. He reports functionally to the Head of Discipline and operationally to one or more Project Managers or Engineers.
Key Responsibilities
Be it in the context of preparation for a tender / proposal or involvement in a project as Discipline or Lead Engineer, the key responsibilities of the Senior Engineer are:
1.Planning and executing Electrical Engineering design for power, earthing and lighting of industrial and commercial facilities. This entails overseeing the preparation of basic design, FEED and detailed design of the Electrical part of the project, and with output in the form of:
Electrical Design Basis
Preliminary Load List
Recommended Option among Electrical concept scenarios
Electrical System Definition
Key Single Line Diagram
Load List / Consumer lists / Equipment lists
Load Balance
Power System Study
Preliminary Short Circuit
Preliminary Load Flow
Job Specifications (Typical and final)
Equipment Data sheets (Typical and final)
Recommended Vendor List
Material Requisitions
Budgetary Estimates
Technical Bid Evaluations
Vendor Liaison: Review of vendor drawings and documents,
Construction Technical Support
Review of bids and preparation of TBE and TBT
Review of drawings from other Disciplines. All design review procedures are as per GENERAL WORKING PROCEDURE.
Specific design procedures for the Electrical Design Checking practice are as defined in GE A346-01
2.Coordination with Project Managers / Lead Engineers from other Disciplines for the inter disciplinary tasks stated in Protocol General Section 1.3 and in GENERAL WORKING PROCEDURE.
3.Planning and implementation of the Project to ensure that deliverables are issued on schedule, project milestone dates are met, and given tasks are completed within the allowed budget
4.Technical and administrative management of the engineers/ designers / draftsmen team.; Assignment and co-ordination of activities within the team to execute the design / procurement related activities of assigned projects
5.Ensuring that the design is carried out as per the industry standard practices and in conformance with the quality management system of TPME
6.Document Control: This entails the development / update of the Document Register with accurate progress information on a regular basis. Each Lead Discipline Engineer is responsible for the discipline filing system for the project. He / she select useful documentation and data at the end of the project and include these in the Department main filing system. Document Control procedures are defined in GENERAL WORKING PROCEDURE.
7.Co-ordination with Project and client, subcontractors and/or suppliers.
8.Providing electrical support to site engineers on technical query issues
9.Coordination with client engineers on electrical engineering issues
10.Providing support in the electrical area for procurement activities
11.Assisting in the preparation of project proposals and tenders in what relates to Electrical engineering design.
12.Identification of issues that impede project progress and reporting to Project Managers / Discipline Heads
13.Providing site engineering support, as well as other inter-disciplinary support should the requirement arise (e.g. Inspection or Procurement technical support).
14.Assimilating the evolution of new products and technology, and updating oneself on the latest international standards m terms of engineering design practices and their applications;
15.Conforming and contributing to the Discipline technical standards, knowledge database and Quality Procedures; identifying new methodology of work process required for higher productivity.
16.Contributing towards, maintaining and implementing both company and client HSE Management System objectives and procedures, as specified in GENERAL WORKING PROCEDURE and the HSE Manual 1357 A - HSEM – 2
17. Complying with the applicable company procedures for the Engineering Department and the Electrical Discipline as they are documented in DEPARTMENT WORKING PROCEDURE respectively, as well as those procedures in the references listed therein.
Operational Duties:
As Lead Discipline Engineer, when assigned on projects, responsible for managing the team of engineers, designers and draftsmen, and delivering the engineering requirements of the project as stated above.
As Acting Head of Discipline, whenever nominated, responsible for the day-to-day administrative management of the Discipline as per the Head of Discipline’s Job Description.
As QMR, whenever assigned, responsible to ensure that the TPME quality" system is understood by Discipline members, and that the Quality Management System is implemented.
As HSE Representative, whenever assigned, responsible to ensure that the TPME HSE Management system is understood and implemented by Discipline members.
Educational requirements:
BSc in Electrical Engineering with Electrical Power Background
Experience Requirement:
Total of 10 years of experience and 2-3 years in Managerial Experience
Specific Experience Areas:
2-3 years in Electrical Engineer in Oil & Gas/Petrochemical environment
2-3 years in Power Generation/Transmission projects
5-6 years in Power Distribution projects
Proven Experience:
Some exposure to power system studies and relay coordination for distribution networks, in addition to basic engineering skills.
Computer Skills:
Candidate should possess basic knowledge of: MS Office package or similar
Languages:
English
Personal:
In addition, the candidate to this position must demonstrate:
Level of Creativity/Initiative-Very Good
Communication Skills-Very Good
Analytical Skills-Very Good
Leadership Skills-Very Good
APPLY
Region Qatar
Location Doha
Contract type Temporary
Start date Immediate
Job description
Senior Electrical Engineer
Purpose and Scope
The Senior Electrical Engineer is primarily engaged in the design, modeling, and analysis of Electrical Engineering requirements on a project, and occasionally the requisition and installation of Electrical Engineering equipment, as per client instructions, TPME standards and project scope. He reports functionally to the Head of Discipline and operationally to one or more Project Managers or Engineers.
Key Responsibilities
Be it in the context of preparation for a tender / proposal or involvement in a project as Discipline or Lead Engineer, the key responsibilities of the Senior Engineer are:
1.Planning and executing Electrical Engineering design for power, earthing and lighting of industrial and commercial facilities. This entails overseeing the preparation of basic design, FEED and detailed design of the Electrical part of the project, and with output in the form of:
Electrical Design Basis
Preliminary Load List
Recommended Option among Electrical concept scenarios
Electrical System Definition
Key Single Line Diagram
Load List / Consumer lists / Equipment lists
Load Balance
Power System Study
Preliminary Short Circuit
Preliminary Load Flow
Job Specifications (Typical and final)
Equipment Data sheets (Typical and final)
Recommended Vendor List
Material Requisitions
Budgetary Estimates
Technical Bid Evaluations
Vendor Liaison: Review of vendor drawings and documents,
Construction Technical Support
Review of bids and preparation of TBE and TBT
Review of drawings from other Disciplines. All design review procedures are as per GENERAL WORKING PROCEDURE.
Specific design procedures for the Electrical Design Checking practice are as defined in GE A346-01
2.Coordination with Project Managers / Lead Engineers from other Disciplines for the inter disciplinary tasks stated in Protocol General Section 1.3 and in GENERAL WORKING PROCEDURE.
3.Planning and implementation of the Project to ensure that deliverables are issued on schedule, project milestone dates are met, and given tasks are completed within the allowed budget
4.Technical and administrative management of the engineers/ designers / draftsmen team.; Assignment and co-ordination of activities within the team to execute the design / procurement related activities of assigned projects
5.Ensuring that the design is carried out as per the industry standard practices and in conformance with the quality management system of TPME
6.Document Control: This entails the development / update of the Document Register with accurate progress information on a regular basis. Each Lead Discipline Engineer is responsible for the discipline filing system for the project. He / she select useful documentation and data at the end of the project and include these in the Department main filing system. Document Control procedures are defined in GENERAL WORKING PROCEDURE.
7.Co-ordination with Project and client, subcontractors and/or suppliers.
8.Providing electrical support to site engineers on technical query issues
9.Coordination with client engineers on electrical engineering issues
10.Providing support in the electrical area for procurement activities
11.Assisting in the preparation of project proposals and tenders in what relates to Electrical engineering design.
12.Identification of issues that impede project progress and reporting to Project Managers / Discipline Heads
13.Providing site engineering support, as well as other inter-disciplinary support should the requirement arise (e.g. Inspection or Procurement technical support).
14.Assimilating the evolution of new products and technology, and updating oneself on the latest international standards m terms of engineering design practices and their applications;
15.Conforming and contributing to the Discipline technical standards, knowledge database and Quality Procedures; identifying new methodology of work process required for higher productivity.
16.Contributing towards, maintaining and implementing both company and client HSE Management System objectives and procedures, as specified in GENERAL WORKING PROCEDURE and the HSE Manual 1357 A - HSEM – 2
17. Complying with the applicable company procedures for the Engineering Department and the Electrical Discipline as they are documented in DEPARTMENT WORKING PROCEDURE respectively, as well as those procedures in the references listed therein.
Operational Duties:
As Lead Discipline Engineer, when assigned on projects, responsible for managing the team of engineers, designers and draftsmen, and delivering the engineering requirements of the project as stated above.
As Acting Head of Discipline, whenever nominated, responsible for the day-to-day administrative management of the Discipline as per the Head of Discipline’s Job Description.
As QMR, whenever assigned, responsible to ensure that the TPME quality" system is understood by Discipline members, and that the Quality Management System is implemented.
As HSE Representative, whenever assigned, responsible to ensure that the TPME HSE Management system is understood and implemented by Discipline members.
Educational requirements:
BSc in Electrical Engineering with Electrical Power Background
Experience Requirement:
Total of 10 years of experience and 2-3 years in Managerial Experience
Specific Experience Areas:
2-3 years in Electrical Engineer in Oil & Gas/Petrochemical environment
2-3 years in Power Generation/Transmission projects
5-6 years in Power Distribution projects
Proven Experience:
Some exposure to power system studies and relay coordination for distribution networks, in addition to basic engineering skills.
Computer Skills:
Candidate should possess basic knowledge of: MS Office package or similar
Languages:
English
Personal:
In addition, the candidate to this position must demonstrate:
Level of Creativity/Initiative-Very Good
Communication Skills-Very Good
Analytical Skills-Very Good
Leadership Skills-Very Good
APPLY
INSTRUMENTATION DESIGNER
Job posting reference 03375
Region Qatar
Location Doha
Contract type Permanent
Start date Immediate
Job description
Instrumentation Designer
Purpose and Scope
The Instrumentation Designer is mainly concerned with the preparation of design deliverables tor projects, tenders or proposals based on Engineers' plans and according to qualify standards and client requirements.
Key Responsibilities:
1.Organization and co-ordination of design or drafting duties. Output includes:
Input / Output list
Equipment list Layout
Control Room Arrangement
Field Instrumentation Layouts
Preliminary Cable Routing
Typical Installation Details
Material Take-Off
Loop Diagrams
Permutation Diagrams
Detailed Cable / Tray Routing
Cable Schedules
Installation Details
As-Built Documentation
2.Development of drawings, models and documents listed above using CAD systems, as required for the Project or Proposal
3.Revision of other discipline drawings/documents for IDC when required and as per Protocol General Section 1.3 and in GENERAL WORKING PROCEDURE; Checking back-drafted drawings for compliance with QA standards and procedures when required; ; Checking back-drafted drawings for compliance with QA standards and procedures when required;
4.Completion of deliverables on schedule and within the hours allocated.
5.Providing feedback to Lead Engineers on client/site/vendor queries
6.Planning drawing deliverables in line with schedule requirements; Assigning and supervising tasks to Draftsmen to meet project schedule.
7.Providing technical support to draftsmen.
8.Review of vendor drawings as needed
9.Providing input for proposal preparation purposes. Deliverables include; Preliminary Input / Output lists, drawings man-hour estimation and Preliminary Equipment list Layout.
10.Contributing towards, maintaining and implementing both company and client HSE Management
System objectives and procedures, as specified in GENERAL WORKING PROCEDURE and the HSE Manual 1357 A HSEM – 2
11.Complying with the applicable company procedures for the Engineering Department and the Instrumentation and Control Discipline as they are documented in DEPARTMENT WORKING PROCEDURE respectively, as well as those procedures in the references listed therein.
Operation Duties:
The Designer reports functionally to the Discipline Engineers and Senior designers and operationally to an assigned Engineer or Lead Engineer depending on project size and scope.
As QMR, whenever assigned, responsible to ensure that the TPME quality system is understood by Discipline members and that the Quality Management System is implemented.
As HSE Representative, whenever assigned, responsible to ensure that the TPME HSE Management system is understood and implemented by Discipline members.
Educational Requirements:
Technical Certification
Experience Requirement:
Total of 8 years experience
Specific Experience Areas:
Good knowledge of Instrumentation theory
Oil & Gas/Refinery/Petrochemical Industry
Fundamental Knowledge of Design Practices
Computer literate including AutoCAD
Field Construction/Supervision Experience
Telecommunication
Proven Experience in:
Should have developed specific drawings/documents independently in an established project set-up.
Computer Skills:
Candidate should posses basic knowledge of:Integraph,Intools,MS Word
Candidate should have advanced skills in: AutoCAD,MS Excel, MS Access
Languages:
Candidate should have working knowledge of English
Personal:
In addition, the candidate to this positon must demonstrate:
Level of Creativity/Initiative-Good
Communication Skills-Good
Analytical Skills-Good
Leadership Skills-Good
-Team Player
-Motivated
APPLY
Region Qatar
Location Doha
Contract type Permanent
Start date Immediate
Job description
Instrumentation Designer
Purpose and Scope
The Instrumentation Designer is mainly concerned with the preparation of design deliverables tor projects, tenders or proposals based on Engineers' plans and according to qualify standards and client requirements.
Key Responsibilities:
1.Organization and co-ordination of design or drafting duties. Output includes:
Input / Output list
Equipment list Layout
Control Room Arrangement
Field Instrumentation Layouts
Preliminary Cable Routing
Typical Installation Details
Material Take-Off
Loop Diagrams
Permutation Diagrams
Detailed Cable / Tray Routing
Cable Schedules
Installation Details
As-Built Documentation
2.Development of drawings, models and documents listed above using CAD systems, as required for the Project or Proposal
3.Revision of other discipline drawings/documents for IDC when required and as per Protocol General Section 1.3 and in GENERAL WORKING PROCEDURE; Checking back-drafted drawings for compliance with QA standards and procedures when required; ; Checking back-drafted drawings for compliance with QA standards and procedures when required;
4.Completion of deliverables on schedule and within the hours allocated.
5.Providing feedback to Lead Engineers on client/site/vendor queries
6.Planning drawing deliverables in line with schedule requirements; Assigning and supervising tasks to Draftsmen to meet project schedule.
7.Providing technical support to draftsmen.
8.Review of vendor drawings as needed
9.Providing input for proposal preparation purposes. Deliverables include; Preliminary Input / Output lists, drawings man-hour estimation and Preliminary Equipment list Layout.
10.Contributing towards, maintaining and implementing both company and client HSE Management
System objectives and procedures, as specified in GENERAL WORKING PROCEDURE and the HSE Manual 1357 A HSEM – 2
11.Complying with the applicable company procedures for the Engineering Department and the Instrumentation and Control Discipline as they are documented in DEPARTMENT WORKING PROCEDURE respectively, as well as those procedures in the references listed therein.
Operation Duties:
The Designer reports functionally to the Discipline Engineers and Senior designers and operationally to an assigned Engineer or Lead Engineer depending on project size and scope.
As QMR, whenever assigned, responsible to ensure that the TPME quality system is understood by Discipline members and that the Quality Management System is implemented.
As HSE Representative, whenever assigned, responsible to ensure that the TPME HSE Management system is understood and implemented by Discipline members.
Educational Requirements:
Technical Certification
Experience Requirement:
Total of 8 years experience
Specific Experience Areas:
Good knowledge of Instrumentation theory
Oil & Gas/Refinery/Petrochemical Industry
Fundamental Knowledge of Design Practices
Computer literate including AutoCAD
Field Construction/Supervision Experience
Telecommunication
Proven Experience in:
Should have developed specific drawings/documents independently in an established project set-up.
Computer Skills:
Candidate should posses basic knowledge of:Integraph,Intools,MS Word
Candidate should have advanced skills in: AutoCAD,MS Excel, MS Access
Languages:
Candidate should have working knowledge of English
Personal:
In addition, the candidate to this positon must demonstrate:
Level of Creativity/Initiative-Good
Communication Skills-Good
Analytical Skills-Good
Leadership Skills-Good
-Team Player
-Motivated
APPLY
Friday, June 3, 2011
SALES MANAGER
Required 3 years Qatar experience Sales Manager with valid driving licence & Transferable visa for Wood & Plywood Sales, Pls send the CV to email: woodpalaceqatar@gmail.com
ACCOUNTANT
job vacancy in a Reputed Engg & Cont. Company in Doha is urgently looking for the following candidates with min 2 year exp. 1) Accountant cum Secretary, female preferred, 2) HR cum Marketing Executive. Please send your CV to email: cv.becon@gmail.com
ACCOUNTANT
Accountant wanted for a Bookstore. Requirements - Retail experience, Supervision capability, Dealing in Multiple currencies. Email your CV to: thebookstore.qatar@gmail.com
Subscribe to:
Posts (Atom)